Network Cabling Solutions

Network Cabling Solutions

Issue link: http://www.e-digitaleditions.com/i/137513

Contents of this Issue

Navigation

Page 47 of 246

Workstation_2012:Layout 1 7/3/2012 3:40 PM Page 46 Network Cabling Solutions Workstation Products Inserts for Shuttered Faceplates HellermannTyton's angled insert snaps into the shuttered faceplate to provide for a quick-and-easy installation and allows two single outlets or one triple outlet in a single gang faceplate. This optimizes the space available and also relieves cable stress by providing a smooth slope for the cable. Two sizes of blank inserts are available. When using a single outlet in the faceplate, choose either 1 x 1U or 2 x 0.5U inserts. Product Selection Type Description 854-35343 Article No. FP5BLANK-FW Part No. FP5BLANK 0.5U Blank Insert Pkg. Qty. 1 854-35342 FP1BLANK-FW FP1BLANK 1U Blank Insert 1 Use Part No. for ordering and Type for specification purposes. Must be used with FPSHUT-FW or FPHSHUT-FW faceplates. Category 5e Inter-Lock Outlet HellermannTyton's Category 5e Inter-Lock outlet provides a quick-and-effective method of controlling network access. Used with HellermannTyton single gang shuttered faceplates, the Inter-Lock outlet is easy to use. A simple turn of the key is all it takes to enable or disable LAN access by cutting off electrical connection to the orange wire, pin #2. Supplied with two keys per outlet, the key cannot be removed while in the "on" position. All locks are keyed the same. Product Selection Article No. Part No. 852-05467 RJ45LC5E-FW Type Description Pkg. Qty. RJ45LC5E Category 5e Inter-Lock Outlet 1 Use Part No. for ordering and Type for specification purposes. Only available in office white. Must be used with FPSHUT-FW or FPHSHUT-FW faceplates. Horizontal and Vertical Shuttered Jack Faceplates HellermannTyton's shuttered jack faceplates are available in both horizontal and vertical styles. Designed to be used with shuttered jacks, HellermannTyton's shuttered jack faceplates can fit up to two single outlets or one triple outlet. If a single faceplate is used, options for a 1U or .5U blank insert are available. HellermannTyton's shuttered jack faceplates include an adhesive sticker for easy identification. Horizontal shuttered jack faceplates are designed to be used with HellermannTyton's surface raceway systems. Product Selection Article No. Part No. 854-35344 FPHSHUT-FW 854-35381 FPSHUT-FW Type Description FPHSHUT Horizontal Shuttered Jack Faceplate Pkg. Qty. 1 FPSHUT Vertical Shuttered Jack Faceplate 1 Use Part No. for ordering and Type for specification purposes. Only available in office white. 46 For product information visit www.hellermann.tyton.com or call 800.537.1512

Articles in this issue

Links on this page

view archives of Network Cabling Solutions - Network Cabling Solutions