Product
News
Product
News
16 September - October 2014
|
www.machinerylubrication.com
1. Grease Gun
The Lincoln PowerLuber Series 1880 grease gun features
a high-torque powerhead for multiple lubrication appli-
cations. The two-speed motor delivers grease at up to
10,000 psi in both high- and low-output settings. Powered
by a 20-volt, lithium-ion battery, the PowerLuber utilizes a
multifunction liquid crystal display to accurately indicate
standard readings such as battery level and grease flow.
The three-point base keeps the tool upright and stable
for easy handling while also allowing access to tight areas
and reducing operator fatigue when lubricating simple-
to-reach fittings.
Lincoln Industrial
www.lincolnindustrial.com • 314-679-4200
2. Corrosion TesT KiT
Parker Kittiwake's new Cold Corrosion Test Kit offers an
accurate picture of the level of corrosive elements present
in cylinder oil, with results in less than five minutes. Using
a color-matching test, the kit alters the color of an oil
sample, indicating the concentration of non-ferrous iron
compounds. The resulting color is matched to a reference
color wheel that provides a measurement of the corrosive
wear present in the sample.
Parker Kittiwake
www.kittiwake.com • 713-255-7255
3. spill KiT
New Pig's latest spill kit comes in a 55-gallon container
and includes high-quality absorbents for spill-prone
areas. The universal absorbents soak up oils, coolants,
solvents and water. The lightweight polyethylene con-
tainers resist chemicals and keep contents clean and dry.
The highly visible bright-yellow color is easy to locate in
the event of a spill, and the non-threaded lid lifts off for
fast and easy access. Temporary disposal bags with ties
help make cleanup faster, while the molded-in handles
enable easy carrying.
New Pig • www.newpig.com • 855-493-4647
4. rolling-Bearing grease
Klübertherm HB 88-182 lubricating grease from Klüber
Lubrication was formulated for the long-term lubrication
of rolling bearings. It offers excellent high-temperature
properties and can be used for both low loads combined
with high speeds as well as high loads combined with low
speeds. Based on a thermally stable base oil, polytetra-
fluoroethylene (PTFE) thickener and special additives,
the synthetic grease is compatible with elastomer and
thermoplastic components and seals. Klübertherm HB
88-182 is also resistant to hydrolysis and protects com-
ponents against corrosion at high temperatures and in
humid environments.
Klüber Lubrication
www.klueber.com • 603-647-4104
5
1
6
8
