Roadway Safety Guide

Roadway Safety Guide

Roadway Safety Foundation's Roadway Safety Guide is a Primer for Community Leaders on enhancing road features for the safety of motorists, pedestrians and bicyclists. Guide contains info on funding, best practices and checklists.

Issue link: http://www.e-digitaleditions.com/i/418038

Contents of this Issue

Navigation

Page 39 of 105

32 w w w . r o a d w a y s a f e t y . o r g * Pavement Markings: • Properly placed stop bars (4'-8' offset and perpendicular to the mainline) • Dashed edge lines to delineate the mainline and turn bays and establish points of conflicting traffic • Lane arrows and word messages in accordance with standard drawings, general notes and specifications • Addition of crosswalks * Signalized Intersections: • One signal head per lane • Supplemental nearside sign heads • Backplates with retro-reflective border • 12" LED signal indications • Pedestrian treatments such as push button indicators and pedestrian countdown signals Results An FHWA-led, multi-state Pooled Fund Study is currently evaluating the safety effects of SCDOT's low-cost systematic intersection improvements and the overall public reaction has been positive, based on feedback to SCDOT. The retro-reflective borders on signal backplates have proven to be extremely effective in reducing crashes primarily resulting from red-light running, and quite inexpensive to install. The retro-reflective borders were installed at three intersections at a cost of $1,500 each. Red-light running is a serious traffic safety problem in America, so treatments that address this problem inexpensively are notable. The addition of retro-reflective borders on traffic signal backplates has been shown to reduce crashes by 15 percent on average, and at the three test locations in Columbia, showed reductions well in excess of that. Roadway Reconfigurations and "Road Diets" Overview If your safety concern is related to conflicts between turning vehicles and those going straight, a roadway reconfiguration may be worth considering. Depending on a variety of factors, a new street design may make traffic flow more safely and efficiently and may also help to safely accommodate pedestrians and bicyclists. One example of a roadway reconfiguration is a "road diet," which commonly involves converting an undivided four lane roadway into three lanes made up of two through lanes and a center, two-way left turn lane. This change has been shown to reduce crashes by 29 percent. Because this type of reconfiguration reduces the number of through lanes, an engineering analysis should be conducted to determine the impact on both congestion and safety. Road diets on streets with fewer than 15,000 daily vehicles and frequent left- turns had very good results in the areas of safety and operations. Well-designed roadway reconfigurations have multiple safety and operational benefits, such as: Two-lane rural roads see fatality rates two-three times higher than the nation's safest roadways, our Interstates.

Articles in this issue

Archives of this issue

view archives of Roadway Safety Guide - Roadway Safety Guide