Roadway Safety Guide

Roadway Safety Guide

Roadway Safety Foundation's Roadway Safety Guide is a Primer for Community Leaders on enhancing road features for the safety of motorists, pedestrians and bicyclists. Guide contains info on funding, best practices and checklists.

Issue link: http://www.e-digitaleditions.com/i/418038

Contents of this Issue

Navigation

Page 46 of 105

39 even more urgent safety concerns than they are for other users. • The countermeasures designed for passenger cars and trucks are not all effective for motorcycles. In this section, we'll examine some of the major roadway and roadside elements that are particularly hazardous to motorcyclists. If motorcycle safety is your primary concern, this section will give you important information on promising ideas and options for reducing injuries and fatalities among this vulner - able group. For readers who are concerned about road safety more broadly, or who are focused on cars and trucks, careful consideration of the information in this section can help ensure that any projects you pursue do not have unintended, negative conse - quences for motorcyclists. Slippery, Uneven, or Compromised Road Surfaces Road surface quality is important for all vehicles, but is of particular concern to motorcycles. Operating with only two wheels both creates the need to maintain balance and reduces the contact points between the rubber and pavement necessary to establish and maintain traction. A variety of small pavement defects that may be of little to no consequence for larger vehicles may therefore pose significant dangers to motorcycles, and might be overlooked if the needs of motorcyclists are not specifically and deliber- ately considered. Some of the most common roadway characteristics or imperfections can spell disaster for motorcycles. For example, "tar snakes," those ubiquitous meandering strips of sealant used to repair surface cracks, pose little threat to cars and trucks but can be very slippery and hazardous for motorcycles when wet. In fact, the Ohio Department of Transportation (ODOT) has taken a proactive approach in promoting roadway safety for motorcycles and has adopted guidelines limiting crack seals to four inches or less. 38 A similar problem can be seen with certain pavement markings, particularly those that motorcyclists may ride over while turning at intersections. Such lines and markings are often smoother than the surrounding asphalt, becoming even more slippery when wet. Blackout tape, which is used to temporarily cover pavement markings when roadwork or other activities necessitate a change in traffic patterns, can also become slick. Ohio and New Jersey have adopted some of the nation's tightest restrictions on the use of blackout tape because of this. 38 The TRB recom- mends treating or replacing any pavement markings with high-traction material, and including motorcycle traction tests in all standard evaluations of the effec- tiveness of such materials. 39 Safety for Vulnerable Road Users Source: National Highway Traffic Safety Administration

Articles in this issue

Archives of this issue

view archives of Roadway Safety Guide - Roadway Safety Guide