Roadway Safety Guide

Roadway Safety Guide

Roadway Safety Foundation's Roadway Safety Guide is a Primer for Community Leaders on enhancing road features for the safety of motorists, pedestrians and bicyclists. Guide contains info on funding, best practices and checklists.

Issue link: http://www.e-digitaleditions.com/i/418038

Contents of this Issue

Navigation

Page 47 of 105

40 GROOVED PAVEMENT w w w . r o a d w a y s a f e t y . o r g Uneven roadways also pose a challenge for motor- cycle balance, particularly if, as in the case of many metal surfaces – like manhole covers or steel plates – they can also be slippery or hard to see. 39 Think about roadways in your community. Are there potholes that may have been overlooked because they don't appear to pose a threat to cars? Are there manhole covers or steel plates that are not level with the road surface? Are there open bridge joints? Are there work zones with milled asphalt, or pavement drop-offs between travel lanes due to an ongoing re-surfacing project? All of these situations could pose a threat to motorcy - clists, even though they would likely be safe for larger vehicles. Tapering pavement, closing lanes, or finding an appropriate detour may therefore be required to ensure safety for all. 39 Another strategy that has been gaining support is providing adequate motorcycle-specific warning signs. ODOT, for example, changed its standards for work zones – which are prime locations for compromised road surfaces – to require "Grooved Pavement" signs ahead of any surface undergoing treatment. 38 A number of signs geared toward motorcyclists have been created to help call attention to areas of particu- lar concern to two-wheeled vehicles. Debris presents another road surface hazard to all motorists, though larger vehicles tend not to be threatened by some of the hazards that could cause a motorcycle to crash. 40 Motor oil, gravel, sand, tire treads, and even dirt can cause a motorcyclist to lose traction, balance, and control. 39 Debris removal efforts should therefore not be limited to major items like tree limbs or garbage, but should include a range of materials that impact the surface quality of the roadway. Roadside Hazards and Barriers The purpose of roadside and median barriers is to reduce the severity of crashes by preventing collisions with objects that pose an even greater danger than the barrier itself – such as trees, bridge supports, or on-coming traffic. For motorcyclists, however, the barrier itself may be a hazard. Given the inherent lack of physical protection motorcy - clists have when riding, any kind of object – including a barrier – will pose a danger if struck. But steps can be taken to mitigate the risk and severity of injury that motorcyclists face by incorporating "Motorcyclist Protective" design elements into barriers to create "motorcycle friendly" systems. Because the force of an impact is most devastating when concentrated in a small area, like the sharp edge of a support post, the key principle behind such a design is to provide a sur - face that yields a sliding – not a snagging – impact. 41 For example, with guardrails, one way to achieve this is to install a second longitudinal beam, beneath the primary one, that shields motorcyclists from the support posts. Alternatively, the posts themselves can be fitted with impact attenuators, which surround them. 41 Though such systems are gaining in popularity, particularly in Europe, and seem to offer promising Uneven roadways also pose a challenge for motorcycle balance, particularly if, as in the case of many metal surfaces – like manhole covers or steel plates – they can also be slippery or hard to see.

Articles in this issue

Archives of this issue

view archives of Roadway Safety Guide - Roadway Safety Guide