Machinery Lubrication

Machinery Lubrication July - August 2018

Machinery Lubrication magazine published by Noria Corporation

Issue link: https://www.e-digitaleditions.com/i/1005929

Contents of this Issue

Navigation

Page 35 of 76

www . machinerylubrication.com | July - August 2018 | 31 RECIPROCATING OIL AND GREASE PUMP Graco's new A4000 Reciprocating LubePro oil and grease pump is intended for applications where high output and fast lubrication cycles are needed to lubricate equipment while it's working. e single-line parallel pump is able to fire hundreds of injectors at one time using an air motor. e unique pump design also allows for reduced venting times. Available in a variety of configu- rations, the pump comes with a factory-installed pressure gauge, adjustable pressure relief and integrated low-level detection, as well as a creative mounting solution for easy installation. Graco www.graco.com 844-241-9504 LUBE DISPENSING STATION e new Modular Lube Panel Dispensing Station from Y2K Filtration can be configured as a single-drum dispensing and filtering station or multiple units bolted together for a complete lube room and multi-fluid dispensing, recir- culating and filling station. Up to 15 standard stations can be connected, with each station self-contained. e push-button design enables on-demand dispensing. e smart system also locks out other dispensers while one is in use. Available with various quick-connect options, the unit is wall or table mountable. Y2K Filtration www.y2kfiltration.com 888-925-8882 GREASE COUPLER e new LX-1403 quick-release grease coupler from Lumax was developed to help simplify the greasing process. It features an ergonomic thumb-lever design that firmly latches onto a grease fitting, enabling hands- free greasing. e heavy-duty coupler locks on and creates a leak-proof hydraulic seal, with no damage to the seal even after hundreds of uses. e device can fit on all SAE and metric grease fittings, and is suitable for use with manual, battery-powered and air-operated grease guns as well as bulk grease pumps. Lumax www.lumax.com 844-660-6876 5 6 8 6 8 ATOMIZING SPRAY NOZZLES Exair's new internal-mix spray nozzles are engi- neered to atomize fluid where liquid application is needed in a broad area. e nozzles produce a fine mist of atomized liquid that can be easily adjusted to meet the needs of the application. Commonly used with water, light oils and rust inhibitors, they provide liquid flows from 10.8 to 150 gallons per hour and can spray in all directions as well as up to 13 feet in diameter. e spray nozzles are available in a variety of sizes, shapes and connections. Exair www.exair.com 800-903-9247 7 ML 5 7

Articles in this issue

Links on this page

Archives of this issue

view archives of Machinery Lubrication - Machinery Lubrication July - August 2018