30
|
July - August 2018
|
www
.
machinerylubrication.com
BREAK-IN OILS
e new PowerShield
motor oils from Cham-
pion are specially designed
to reduce the potential of engine
failure during hard break-ins.
Offered in 10W-40 and 20W-50
viscosities, the break-in oils
contain high levels of zinc thio-
phosphates in combination with
Champion's ermal Viscosity
Stabilizer (TVS) to extend oil
film capacity for proper ring
seating. e new lubricants are
also formulated with polymer
thickeners to allow the use of
a thinner viscosity base oil for
easier cold starting and reduced
friction. Dispersants and other
additives are included to help
keep the engine clean.
Champion
www.championbrands.com
800-821-5693
CONDITION
MONITORING SYSTEM
e new Dynapar
OnSite Condition
Monitoring System is
engineered to enable remote
monitoring of virtually any
asset, including turbines, fans,
pumps, gearboxes, etc. e
wireless system combines 24/7
condition monitoring with
cloud-based analytic software
for multi-stakeholder access.
e hardware consists of a
central hub that aggregates
data from four separate wired
sensors. Each sensor measures
vibration along three axes
as well as temperature. e
system can also connect to
an encoder, integrating speed
to enhance analytics and
troubleshooting.
Dynapar
www.dynapar.com
800-873-8731
METAL-REMOVAL
FLUID
Houghton Interna-
tional's new HOCUT
8640 metal-removal
fluid is intended for multi-
metal machining and grinding
applications. Formulated to
improve operational efficiency,
part quality and surface finish,
the biostable fluid features
built-in detergency, dispers-
ibility, emulsion stability and
low foaming characteristics for
consistent lubrication and heat
transfer performance. In field
tests, HOCUT 8640 provided
proven performance on a broad
range of metals, including high
and low carbon steel, stainless
and alloyed steel, cast nodular
and gray iron, wrought and cast
aluminum, powdered metal, and
carbon particle composites.
Houghton International
www.houghtonintl.com
800-666-4684
PARTICLE ANALYZER
e new LaserNet 200
Comprehensive Particle
Analyzer Series from
Spectro Scientific was developed
for extensive analysis of particles
in lubricating and hydraulic
fluids. e new series increases
the particle counting range
up to 10 million particles per
milliliter without dilution and
incorporates a new set of ferrous
particle measurements to give
users insight into the progress
of machine wear. e analyzer
employs laser-imaging technology
and dual magnetometers to char-
acterize ferrous particles larger
than 25 microns as well as total
ferrous particles. Users can now
process very dirty engine and
gearbox oils from heavy equip-
ment such as mining excavators.
Spectro Scientific
www.spectrosci.com
978-486-0123
1
2
3
4
4
PRODUCT NEWS
2
1
3
