Machinery Lubrication

Machinery LubricationRGBSeptember_October_2018

Machinery Lubrication magazine published by Noria Corporation

Issue link: https://www.e-digitaleditions.com/i/1032074

Contents of this Issue

Navigation

Page 14 of 72

10 | September - October 2018 | www . machinerylubrication.com COVER STORY Although there were desiccant filters on top of the totes, technicians often removed them for ventilation as they dispensed oil for the machines, using 5-gallon buckets as transfer containers. e plant initially designated a clean room for lubricants with color- coded transfer containers and storage totes. However, the totes used gravity dispensing and lacked pumps or filter systems. e supplier pumped in new oil but only had one pump for all oils. is system forced the plant to flush at least 5 gallons of oil through the pump to prevent cross-contamination. Since the supplier pumped in the oil, SFI had no way to test the oil beforehand, leading to several instances of cross-contamination. In the second redesign, Simmons enlarged the lube room. Color- coded storage tanks were installed with dedicated stationary pumps to eliminate cross-contamination as well as the need to flush oil through the pump. e new system also provided a window to pull and test samples before placing the oil into the storage system. e current climate-controlled lube room contains color-coded bulk storage tanks and dedicated transfer containers/carts to transfer dispensed oil to equipment. A high-temperature steam dishwasher now maintains the quality of the transfer containers. All incoming oils and greases are dated for shelf life. SFI also developed a method for daily cleaning, oil circulating and inspecting safety devices, including static grounds on all transfer pumps. Other features include slip-resistant flooring, an eyewash station and a fire extinguisher. e new storage tanks enable the plant to keep oils cleaner and dryer. With the ability to circulate oil and suspend additives, the tanks maintain the oil in optimal conditions until it is transferred to the equipment. SFI also set a standard for consolidating its lubricant storage to avoid expiration of the lubricants, ensuring a higher quality of materials. e revamped storage areas allow Simmons to cut costs on its lubricants by eliminating excess oil. Technicians use sealable and refillable containers that are color-coded and dedicated to a specific oil for low-volume top-ups. Color-coded filter carts are utilized for the large top-ups and sump oil changes. ese carts permit the oil to be filtered a final time as it is put into the machine. Color-coded totes and labels save time as the technicians no longer need to find information on specific machines each time an oil change, top-up or oil analysis sample is required. Each machine has a color-coded identification tag that matches the lubricant label on all storage and transfer devices with the machine number, machine description and lubricant description. All grease points adhere to the same practice. e equipment's color-coded caps match the grease gun colors as well as the labeling on the grease tubing and can be traced back to where the grease is stored. e SFI lube room is now in a centralized location, accessible from all areas of the plant. Employees no longer travel from one end of the facility to the other for supplies. With a clean, climate-controlled environment that is safe from water and other contaminants, the shelf life of lubricants can be extended. PM Optimization, Work Plan Management, Scheduling and Documentation As part of its reorganization, SFI fine-tuned its management, sched- uling and documentation to ensure that the team could determine accountability throughout the facility. A reliability team was formed, and technicians were assigned to consistently service their machines with proper lubricant amounts at the correct frequencies. When the new program began, SFI hired Noria consultants to provide procedures for all lube points. ese procedures included frequencies, amounts and step-by-step directions for servicing each piece of equipment. For the first time, technicians could refer to a stan- dard document on how to correctly service equipment. Now, whether the technicians are new or experienced, they can service the machine in the same way. In addition to the required training on preventive maintenance optimization (PMO), optimizing the documentation during main- tenance rounds has improved the schedule for equipment repair. If technicians identify an issue, the new procedure requires employees The in-house oil analysis laboratory allows for faster analysis of incoming and in-service lubricants. COME HEAR ME SPEAK AT Tim Newman – Maintenance Manager, Simmons Feed Ingredients

Articles in this issue

Links on this page

Archives of this issue

view archives of Machinery Lubrication - Machinery LubricationRGBSeptember_October_2018