Machinery Lubrication

Machinery LubricationRGBSeptember_October_2018

Machinery Lubrication magazine published by Noria Corporation

Issue link: https://www.e-digitaleditions.com/i/1032074

Contents of this Issue

Navigation

Page 15 of 72

www . machinerylubrication.com | September - October 2018 | 11 to immediately create a work request. is system increases the effi- ciency of equipment repair and enables management to track and check specific replacement parts. Oil Analysis Program Design, Test Slates, Lab Selection and Setting of Alarms In the initial stages of the new program, the plant relied on its supplier's laboratory to analyze oil samples before switching to an outside lab. After changing to the new lab, Simmons implemented oil analysis training in order for personnel to set their own alarms and limits for each sample. e company discontinued the lab's standard one-size-fits-all approach to testing and developed written test slates for each sample from every piece of equipment. is testing procedure provided patterned information, ensuring that each sample revealed as much as possible about the machine's performance. SFI also set up exception testing in the event that the samples demonstrated deficien- cies. Exception testing saved time in reviewing the reports because the lab already had instructions in place to find the necessary information. Today, SFI's educated team utilizes the optimal practices with top-of-the-line sampling equipment. Two onsite reliability engineers with Level II Machine Lubricant Analyst (MLA) certifications perform all sampling. Updated equipment with sample ports allow technicians to collect samples correctly and efficiently. SFI also added bottom sedi- ment and water (BS&W) bowls and 3D bull's-eye sight glasses to help monitor the oil. Simmons recently converted a former breakroom into an in-house oil analysis laboratory, outfitted with the appropriate equipment to retrieve the information from oil samples. e lab also provides a faster analysis of incoming and in-service lubricants. SFI improved the sampling of vacuum pumps with cleaner sample bottles and more efficient methods. e facility also upgraded sampling hardware, ensuring the right type of sampling valve for the equipment. Noria developed written procedures that detail the processes of the sampling program, enabling technicians to collect information with a consistent method. Contamination Exclusion and Removal As part of the new lubrication program, SFI upgraded its equipment to remove contamination from its machines. Mobile filter carts were purchased to move from machine to machine. Technicians used a dedi- cated filter cart for critical machines to continuously circulate oil. ese dedicated filter carts were put on large sumps, and facility personnel employed portable filter carts for the smaller sumps. e transfer filter carts and top-up containers are color-coded to match the storage tanks and the equipment's lubricant identification system (LIS) tags. e filter carts allow for the filtration of oil one last time before the machine is filled with new oil. Both the filter carts and the equipment have been retrofitted with quick connects, enabling them to connect to a machine without exposing the oil to the environment. All machines are equipped with desiccant breathers and sight glasses to keep them sealed. Using this practice, Simmons found that oil can last for years beyond the previously perceived life expectancy. Contam- ination control gives the plant's machines a longer lifespan, resulting in fewer breakdowns. Some oil has been in the sumps for 1,500 days and is still in good health. In just one year, Simmons saved approximately $43,000 through its contamination control methods. Lubricant Application Methods Plant personnel previously used recycled containers to move lubri- cants from one place to another without a standard cleaning method. Technicians also handled grease guns in an unregulated manner – a key contributor to the recurring breakdowns. To remedy this issue, Simmons purchased color-coded, lubricant- dedicated equipment so the transfer containers possessed the same product in them at all times, helping to avoid cross-contamination issues. All lubricants are now stored in the lube room in color-coded, designated areas. e color-coded labeling system corresponds to the lubricant's brand name. Displayed posters allow technicians to know which lubricant they are selecting when they use a transfer container or fill Examples of the lube room and oil containers before the lubrication program The Simmons lube room after the lubrication program ML

Articles in this issue

Links on this page

Archives of this issue

view archives of Machinery Lubrication - Machinery LubricationRGBSeptember_October_2018