Machinery Lubrication

Machinery LubricationRGBSeptember_October_2018

Machinery Lubrication magazine published by Noria Corporation

Issue link: https://www.e-digitaleditions.com/i/1032074

Contents of this Issue

Navigation

Page 7 of 72

ML types. ey also have above-average subject-matter competency in other ancillar y inspection tasks and methods. Inspection technicians are people who perform regular inspec- tion routes and practice extensively in their field. Inspection analysts can be defined as resident experts with deep subject- matter knowledge and experience across many disciplines (mechanical, electrical, instrumentation, safety, etc.) on inspection tasks and methods. Inspection analysts do not have job cross-functionality. ey also are not operators, mechanics, electricians or lube techs. Access to this degree of inspection knowledge is the essence of Inspection 2.0. Inspection analysts are trained, certified and have extensive expe- rience performing inspections. ey have the ability to see what others cannot. They don't just look or hear but rather examine carefully and probe further. ey also have a good toolbox of needed inspection aids. ey possess ency- clopedic knowledge on various inspection subjects as well as the other technical areas of condition monitoring. And, they know what goes on within the exoskeleton of the machine being inspected. Effective inspection analysts are hired guns or resident experts who can be called in to assist in trouble- shooting efforts. Alternatively, they can be deployed to perform inspec- tion routes on machines designated as high criticality or are known bad actors. An inspection analyst is a certified Category III inspector. All large industrial plants should have at least one inspection analyst on staff. ML About the Author Jim Fitch has a wealth of "in the trenches" experience in lubri- cation, oil analysis, tribology and machinery failure investigations. Over the past two decades, he has presented hundreds of courses on these subjects. Jim has also published more than 200 technical articles, papers and publications. He serves as a U.S. delegate to the ISO tribology and oil analysis working group. Since 2002, he has been the director and a board member of the International Council for Machinery Lubrication. He is the CEO and a co-founder of Noria Corporation. Contact Jim at jfitch@noria.com. www . machinerylubrication.com | September - October 2018 | 5 Food Grade Products You Can Trust Synthetic FG Elite Solutions Summit FG Elite Series food grade compressor lubricants use 100 percent multi-synthetic base oils in combination with performance driven additives to offer extended lubricant life. These lubricants are specially designed for rotary screw, vane, reciprocating air compressors and vacuum pumps used in the food service industry. See all our Food Grade products www.klsummit.com Klüber Lubrication NA LP 800.749.5823 // info@klsummit.com ISO 21469 Certied klsummit.com

Articles in this issue

Links on this page

Archives of this issue

view archives of Machinery Lubrication - Machinery LubricationRGBSeptember_October_2018