Machinery Lubrication magazine published by Noria Corporation
Issue link: https://www.e-digitaleditions.com/i/1148092
LEARNING SESSIONS Best Practices for Hydrodynamic Cleaning and Flushing of Oil Systems Wojciech Majka - President and CEO, Ecol, and Tomas Klima – CEO, Ecol Industrial Many compressors go down every year because of dirty oil systems. Unfortunately, there is no magic wand to restore the situation to normal, except for properly cleaning the system followed by appropriate oil flushing. This presentation will discuss the benefits of hydrodynamic cleaning with high-pressure water jets and subsequent high-velocity oil flushing of systems as a viable alternative to other methods. Find out how this cleaning and flushing technology can be an effective method of preparing new oil systems and restoring operated systems regardless of their size and complexity. Guidelines for Creating a Lubrication and Condition Monitoring Plan Michael Holloway – President, 5th Order Industry With most things in life, a plan is required for success to occur. Likewise, a lubrication program demands a plan that considers safety, the environment and increased reliability all while maintaining budgetary objectives. This session will help you establish the groundwork for the development of just such a plan. It explores the complexities of lubricant analysis and monitoring the oil condition, wear and contamination, as well as the machine selection process and how these initiatives align with the new ICML 55 standard. Attendees will also gain a better understanding of the operating conditions that are imposed on lubricants and what the expected impact may be. Understanding the Importance of Flow Rate in Hydraulic Systems Peter Karl Mainka - Maintenance Engineer, MaTeHa Service The flow of oil has a decisive influence on energy losses in hydraulic systems. This presentation will provide important information that can be applied to every hydraulic system, including how the speed by which a fluid flows through a system will be dependent on the fluid's viscosity and lubricity. Attendees will learn how to distinguish between the two types of flow, how the Reynolds number can be used in the calculation of flow types, how to handle flow rate issues and how to monitor the flow rate in their hydraulic systems. How to Improve the Speed, Safety and Consistency of Oil Sampling Giuseppe Adriani – President, Mecoil Diagnosi Meccaniche The goal of any oil analysis program is to collect the most accurate information possible from machine components while eliminating the potential for cross-contamination. This session will explore the technological advancements in sample bottle design that not only have eliminated the potential ingression of contaminants from the environment but also reduced the number of tools needed to collect an oil sample. Attendees will learn methods for pulling an oil sample that are fast, clean and virtually hands-free, even when collecting highly viscous lubricants in the field.

