Machinery Lubrication magazine published by Noria Corporation
Issue link: https://www.e-digitaleditions.com/i/1148092
LEARNING SESSIONS How to Prevent Varnish Formation in Turbine Oil Marcella Frauscher - Area Leader, AC2T Research Varnish formation in turbine oil is a very expensive problem that unfortunately is all too common. This presentation will address this widespread issue and detail a unique lab-to-field approach that is intended to help. Join AC2T's Marcella Frauscher as she explores the potential of a new laboratory-based simulation method for oil selection and benchmarking. Attendees not only will see detailed lubricant analysis and gain insight into the formation of varnish, but also learn how to choose the best varnish countermeasures for their plant. Strategies for Mitigating Varnish in Compressor Oils Nurudin Bn Mochamad Djamil - Technical Specialist, Pertamina Lubricants Refrigeration compressors are critical equipment in many petrochemical plants. These types of systems are prone to develop varnish, especially if ammonia is allowed to mix with the lubricating oil. This presentation will describe mitigation strategies for removing varnish from in-service oil, even when tests show a low varnish rating. Attendees will discover why common tests such as acid number and membrane patch colorimetry may not be effective for indicating when the lubricant is contaminated with ammonia, as well as which equipment is best for reducing varnish formation and extending the service life of the lubricating oil. New Types of Lubricants for Metalworking Processes Wilhelm Rehbein - Senior Manager Technical Application, Lanxess Zinc stearate powder is generally used as a lubricant for the cold impact extrusion of aluminum alloys. Because of the powder's low density, a dust is formed which can irritate the eyes, skin and respiratory tract. Zinc stearate also leaves behind a residue in the extrusion tool and causes problems in the cleaning of manufactured parts. This presentation will describe the development and testing of a new lubricant that is intended to serve as a replacement for zinc stearate powder. Attendees will see how and why this new lubricant was developed, the advantages of using the new lubricant instead of zinc stearate, and how this lubricant performs in a real cold impact extrusion process. Determining the Right Housing for Your Oil Filter and Why It Matters Scott Howard - Senior Trainer, Hy-Pro Filtration Selecting the right housing for an oil filter plays a critical role in the equipment's cost of ownership. Undersized filter housings result in remaining filter element capacity being thrown away or minimizing the media grade that could be used in an application. This session provides a deep dive into proper filter housing sizes, explaining what is required to calculate whether a filter housing will be large enough for its intended use. You will learn the best practices for correctly sizing your filter housings and how to add or upgrade a filter housing within certain systems. How to Avoid Mineral Oil Contamination in Food Processing Dr. Holger Streetz - Director of Business Development, Bathan AG Mineral oil saturated hydrocarbons (MOSH) and mineral oil aromatic hydrocarbons (MOAH) are chemical compounds found in mineral oil that can cause cancer when ingested. This type of contamination in food processing may come from packaging or even lubricants. While there currently are no regulations defining the limits or forbidding the use of lubricants containing these mineral oil substances, the levels of these potential contaminants in food should be kept as low as possible. This presentation will explain what MOSH/MOAH contamination is, how it enters the food chain and which industries are affected. Attendees will hear real-world examples that show how H1-certified greases can mitigate the risk of contamination as well as what regulations can be expected in the near future.

