Machinery Lubrication

Machinery Lubrication September-October 2019

Machinery Lubrication magazine published by Noria Corporation

Issue link: https://www.e-digitaleditions.com/i/1171112

Contents of this Issue

Navigation

Page 13 of 70

After this list of goals was submitted, Briner attended his f irst Reliable Plant Conference & Exhibition in 2017. The purpose of his attendance was to sit in as many sessions as possible to gain points toward his MLT I certif ication. To his surprise, he received much more for his visit. RELIABLE PLANT 2017 e second and third goals on the list centered on fi nding a new laboratory. At the Reliable Plant Conference, Briner discovered a lab that promised to have oil test results back within 24 hours and at a savings of half the current cost per sample. e new lab also agreed to train Briner on how to read and understand the results to proactively tackle issues. Now he would know how good his oil was and whether it could last until the next scheduled quarterly oil sampling. In addition, this lab could provide an online database with a history of the oil sampling as a bonus service. is database makes it easy to go back and look at baseline samples to see trends and spikes. For instance, Advanced Composites received a report indi- cating what was considered a high particle count. Previously, a fi ltration work order would have just been scheduled, but after examining the current report, some past reports, and the baseline report, the company determined that the particle count wasn't high at all. It was consistent across all the samples. ere was no need to create a new work order. is saved a tremendous amount of man hours. Personnel at the new lab were also very interested in visiting the Advanced Composites facility to get a better idea of the environment in which the equipment operates. is allowed them to recommend the best tests for the equipment. Briner now receives better results that are tailored to his type of production and equipment, and he is in a better position to advise the maintenance team on what to do. ey can see when a problem is coming, and if something keeps recurring in the results, they can dig into it to determine if there is a larger issue. is has resulted in the company spending small amounts on little, immediate fi xes rather than discovering a $1 million problem 30 days later. Partnering with this new lab eff ectively crossed two items off the to-do list. At the same conference, Briner met Bernie Hall, who said he could help with in-service fi ltration. ey discussed installing "oil access assemblies" on a vital piece of equipment to see if they could fi lter while the equipment was in production. After a few phone calls and emails, Hall had all the information needed to put together the fi rst assembly. On Aug. 25, 2017, the assembly was installed on a trial basis and tested for about 30 days. One piece of the assembly is installed into the drain port. is portion includes a ML www . machinerylubrication.com | September - October 2019 | 9

Articles in this issue

Links on this page

Archives of this issue

view archives of Machinery Lubrication - Machinery Lubrication September-October 2019