Sport Rocketry

Sport Rocketry 2.2020

Issue link: https://www.e-digitaleditions.com/i/1220484

Contents of this Issue

Navigation

Page 39 of 55

does not directly activate the relay coil; instead, the pulse acts as a switch to trigger the timer. The timer circuitry energizes the relay coil, closing the NO contact and "latching" it closed until the set time has elapsed. The thing I learned the hard way about the LRMs I obtained was that they are triggered by a switch, not an electrical pulse. In other words, they do not work if any voltage (such as that sup- plied by the receiver when it is activated) is applied to the trigger. For multi-channel modules, a single buzzer can be connected from the (+) battery post to all of the COM terminals. The entire setup is compact and easily installed on a sawhorse-type rack (Figure 9). Latching Relay Modules While the DBR's two-second pulse activating the relay is typi- cally sufficient to fire just about any igniter, sometimes a longer pulse is needed, especially for bridge-wire igniters and clustered motors. Since the pulse length of the transmitter cannot be adjust- ed, we needed another means of keeping the relay coil energized. Fortunately, our artificially-intelligent friends residing inside the Google Magic Box provided a solution in the form of "Latching Relay Modules." A Latching Relay Module (LRM) in its most basic form consists of a relay and a timer. The simplest LRMs have a rheostat-type tim- er adjusted with a screwdriver (Figure 10). The wireless receiver 40 MARCH/APRIL 2020 SPORT ROCKETRY Figure 10. Rheostat-type, single-channel Latching Relay Module (LRM), activated by relay module output terminals. Figure 11. Programmable digital four-channel LRM. I fried a couple of rheostat-type LRMs and couldn't get the digital programmable LRM to function until I figured this out. The solu- tion was simple; keep the original configuration of connecting the wireless receiver to the relay module, but instead of connecting the +12V battery lead to the module's COM output terminal, just con- nect wires from the COM and NC module outputs to the trigger input of the LRM. When the receiver sends the pulse to the relay module, it closes the connection between the COM and the NO terminal, triggering the timer. While the simple rheostat LRMs work, precisely setting the time delay can be tricky. Using programmable digital multi-chan- nel LRMs solved that problem. A 4-channel programmable LRM Figure 12. rfRemoTech MS12Q firing system. Figure 13. rfRemoTech TCF-200U modular programmable transmitter for use with multiple MS12Q receivers.

Articles in this issue

Archives of this issue

view archives of Sport Rocketry - Sport Rocketry 2.2020