Sport Rocketry

Sport Rocketry 2.2020

Issue link: https://www.e-digitaleditions.com/i/1220484

Contents of this Issue

Navigation

Page 30 of 55

SPORT ROCKETRY MARCH/APRIL 2020 31 back-and-forth in a linear path much as your arm is supposed to operate when you give a massage to your ever-patient wife. My arm considers massages far too much of an ordeal, so I had bought a linear sander to do the job. Before I even had a chance free opposing orbital sanders, rotary sanders, band sanders, dremels, drill sanders, disc sanders, drum sanders, mop sanders, and a linear sander. That's it! The Linear Sander (see Fig- ure 7)! Oh What A Tool! For the fin- est in finishes, a linear sander moves Figure 13. The backing block, now shaped to match the body tube, has the glue applied to it and is ready for the black hook-and-loop to be glued on. (Right) Figure 12. The unprotected hard-foam backing block is attached to the sander and pressed against the sandpapered surface. By running the sander, the curve of the body tube is sanded into the block until the block perfectly conforms to the shape of the body tube. Figure 14. The black hook- and-loop has been glued on, and a sheet of sandpaper pressed on as well. Ready to sand, and sand, and sand.

Articles in this issue

Links on this page

Archives of this issue

view archives of Sport Rocketry - Sport Rocketry 2.2020