Sport Rocketry

Sport Rocketry 2.2020

Issue link: https://www.e-digitaleditions.com/i/1220484

Contents of this Issue

Navigation

Page 50 of 55

shield) and then through the cross. Or two, you can run the hex bolt through the cross, then the blast shield, and then screw on the drill chuck. I recommend going with the first option for ease of set up and tear down of the pad. Now for the final assembly. Join the legs to the cross by sticking the exposed 3/4 inch pipes on each end of the cross into each of the open ends of the 45-degree el- bows on the legs. DO NOT USE GLUE! It may take a little muscle to do this the first few times, and it's easier if you twist the legs back and forth to get them on or off. When you're done you should have a 4-legged stand sitting in front of you. Place the blast shield on top of the cross with their holes aligned. Put a launch rod in the drill chuck, tighten it up, and drop the spindle through the holes in the blast shield and the cross. Poof! It's a launch pad! The pad can be disassembled and the pieces stowed in a much smaller area than is taken up by the assembled unit. It's fairly lightweight and easily portable. Its big dis- advantage is the inability to aim the launch rod in any direction other than straight up, although two of the legs can be canted off of vertical to tilt the pad somewhat. I rec- ommend you spray the drill chuck with WD-40 after a day of launching as it tends SPORT ROCKETRY MARCH/APRIL 2020 51 NAR Junior Member Science Fair Contest NAR Junior members: Have you done a science fair project that involves model rocketry? If so, you can enter your project into the NAR Junior Member Science Fair Contest. Up to six winners will receive free NAR membership renewals including First Class delivery of Sport Rocketry magazine! If you don't have a science fair project involving model rocketry, start thinking ahead to next year, because the NAR will run this same contest next year. Lalitha Dhyaram, 2019 winner, and her rocketry display. Materials: 1 10 ft. length of 1 1/4 in. schedule 40 PVC Pipe 1 1/4 in. PVC Cross (schedule 40) 4 1 1/4 in. 45 degree PVC Elbows (schedule 40) 1 3/8 in. drive, all metal drill chuck and chuck key 1 Hex Bolt 3/8 x 3 in. #5 grade fine thread 1 6 to 10 inch round piece medium gauge sheet metal 1 small can of PVC glue with brush Selection of launch rods, up to 3/8 in. diameter Tools: • Pencil • Measuring Tape • Mitre box and saw • Drill • Drill bits • Hack saw to be corroded by the rocket exhaust. Oth- erwise the whole unit is fairly robust and has easily handles rockets with G-sized mo- tors. Best of all, its inexpensive; the total cost except for the sheet metal and launch rods was just under $25 at Home Depot. Use the money you save on more thrust! CONTEST RULES: 1. The contest is open to NAR Junior members. 2. Any science fair project involving model rocketry or high power rocketry is eligible to enter. The project can be a study of some aspect of rocketry, or it can be a project that utilizes rockets as a testing or data collection tool. Projects entered in a previous year's contest are not eligible for entry in this year's contest. 3. Submissions should include copies of your science fair report and display graphics. Include whatever material you feel will help the judges to better evaluate your project. You may mail hardcopy, send files on disc, or submit files electronically. A photograph of you by your science fair display or conducting your rocketry project would be appreciated, but is not required. 4. Entries will be judged on Research Value and Originality, Scientific Thought and Engineering Goals, Organization and Thoroughness, Effort, and Clarity. 5. Membership renewals won in the contest are not transferable to other persons. 6. All Junior members who enter the contest will be listed in Sport Rocketry magazine. 7. You retain any copyright and commercial rights to your projects. You grant the NAR the right to publish your project in any of its publications. The entry materials become the property of the NAR and cannot be returned. 8. Deadline for entry (by postmark) is June 30. (We will run the contest again next year, so start thinking ahead!) 9. Submissions may be mailed to: Thomas Beach, Science Fair Contest, 432 Pruitt Avenue, White Rock, NM 87547, or may be submitted via email to SReditor@nar.org (keep individual email sizes below 10MB, and use Subject: NAR Junior Science Fair). Be sure to include your name, NAR number, address, phone number, and email address.

Articles in this issue

Links on this page

Archives of this issue

view archives of Sport Rocketry - Sport Rocketry 2.2020