Issue link: https://www.e-digitaleditions.com/i/1283117
To help offset the cost of high-powered model rocketry, I decided to assemble a rocket fleet that uses modular elements that I can organize in different ways to meet the objectives of multiple missions. I decided to standardize on a 4-inch fiberglass body tube size, and I have different boosters that share avionics bays, payloads, nose cones, and parachutes. Figure 1 shows the com- pleted altimeter bay. A key enabler of this approach is a flex- ible and modular altimeter bay. This article outlines the process that I went through to create the altimeter bay, from require- ments, design and fabrication, to assembly and testing. To facilitate my mix and match fleet, I designed a modular avionics bay with the following essential requirements: • Support for multiple 4-inch boosters, both fiberglass and blue tube • Rapid assembly and reconfiguration • Tinder CO 2 ejection (see Figure 2) with two black powder backup charges for the main parachute • Three black powder charges for drogue parachute • Removable tracker unit This article details the steps that led to that finished avionics bay. The altimeter bay bulkheads lie at the core of the altim- eter bay. I contacted David Fliger of RocketJunk- ies on The Rocketry Forum and hired his services to machine the bulkheads. I sub- mitted my initial Custom Computer-Aided Design (CAD) designs and files to him. He offered several useful suggestions and de- sign refinements to enhance the design. My experience with altimeter bays is that a sled down the middle limits space because the rounded body tube significantly inhib- its square objects like batteries and altim- eters. Also, altimeters cannot be placed too by Curtis Heisey NAR 90223 L2 MODULAR AVIONICS BAY for Medium- and High-Power Rocketry Featuring Custom Computer-Aided Design (CAD) Bulkheads Figure 1. Completed altimeter avionics bay. SPORT ROCKETRY SEPTEMBER/OCTOBER 2020 35

