Sport Rocketry

Sport Rocketry 5.2020

Issue link: https://www.e-digitaleditions.com/i/1283117

Contents of this Issue

Navigation

Page 18 of 55

tract NOw 62-1106-C, Atlantic Research Corporation began investigating the prob- lem of fragmenting the spent rocket ve- hicle assembly, subsequent to payload ejection, to sufficiently small particle siz- es to provide low impact kinetic energy. The fragmentation would be achieved by means of an explosive system designed as an integral part of the rocket. Designated Frangible ARCAS, development of the mo- tor hardware and vehicle subsystems con- tinued until March 1963 when program funding was expended before evaluation of proposed fragmentation concepts could be completed. In April 1964, additional funding be- came available through the Air Force Cam- bridge Research Laboratories Office of Aerospace Research, under contract No. AF 19(628)-4033, for continued develop- ment. The initial design required fragmen- tation capability as a single modular charge at the head end of the motor casing. This afforded easy modifications to achieve re- sults within the specified limits. Neverthe- less, testing of the single modular charge proved the inability to sufficiently frag- ment the center section of the motor case. Thus, program efforts shifted to testing and evaluating an externally placed sheet explosive in combination with a primary charge in the forward section of the motor. Rocket Motor Development The Frangible Arcas rocket motor in- corporated a glass filament wound motor case containing a tapered Tayloron 5031 insulator, the standard Arcas graphite throat insert with Tayloron PA-6 backup SPORT ROCKETRY SEPTEMBER/OCTOBER 2020 19 FRANGIBLE ARCAS by Chris Timm Frangible-ARCAS Project Manager George Oss looks over diagnostic test vehicles AFFT-1 & AFFT-2.

Articles in this issue

Archives of this issue

view archives of Sport Rocketry - Sport Rocketry 5.2020