Sport Rocketry

Sport Rocketry 5.2020

Issue link: https://www.e-digitaleditions.com/i/1283117

Contents of this Issue

Navigation

Page 19 of 55

20 SEPTEMBER/OCTOBER 2020 SPORT ROCKETRY insulation, a laminated fiberglass head plate, and the standard Arcas propellant grain and igniter. During Phase II of the program, development of the lightweight fiberglass motor case was completed, as were static firings of the motor at -50 and +1300 F. Although the motor case was devel- oped and static firings occurred during Phase II of the program, additional static firings of the rocket motor were conduct- ed during Phase III to evaluate surface temperatures resulting from heat transfer through the motor case wall. The require- ment for these data were foreseen in the event that external placement of explosive material was needed to effect adequate fragmentation of the rocket assembly. Sev- en static firings of the flight design filament wound motor case were successfully com- pleted during Phase III of the program in as many attempts. Fin Assembly The Frangible Arcas fin assembly was an integral canister design made of mag- Aft view of motor. Frangible Arcas.

Articles in this issue

Links on this page

Archives of this issue

view archives of Sport Rocketry - Sport Rocketry 5.2020