Issue link: https://www.e-digitaleditions.com/i/1284149
October/November/December 2020 I 17 The most recent and ingeniously innovative use of LED lighting is in its application for data transmission. This new technology that is showing great promise for the future of wireless data transmission is called light fidelity (Li-Fi). It is committed to making an internet connection as simple as turning on a light switch! UNDERSTANDING THE TERMINOLOGY Light fidelity is a visible light communication (VLC) system and a wireless communication technology utiliz- ing light in high frequency to transmit data to and from devices through light output. The VLC term dates to the 1880s. It includes any use of the visible light portion of the electromagnetic spectrum to transmit informa- tion. The term VLC was further defined by the IEEE 802.15.7r1 standardization committee in January 2016. The Li-Fi concept was invented by Professor Harald Haas from the University of Edinburgh, Scotland in 2011 when he demonstrated for the first time that by flickering the light from a single LED, he could transmit far more data than a cellular tower. 1 The term Li-Fi was launched at his 2011 TED Global Talk where he introduced the idea of wireless data from every light bulb; his talk has been watched online more than 2.4 million times. He remains Professor of Mobile Communications at the University of Edinburgh and the co-founder of pureLiFi along with Dr Mostafa Afgani 2 where research and modifications toward standardization are ongoing. THE CONCEPT OF Li-Fi AND HOW IT WORKS "Light fidelity is a high-speed, bidirectional networked technology achieving mobile communication of data using light. Li-Fi is comprised of multiple light bulbs that form a wireless network." 3 When an electrical current is applied to an LED light bulb, a stream of light or photons is emitted through the bulb. Each tiny LED lamp is a semiconductor device, which means that the brightness of the light flowing through it can be changed at an extremely high speed. This allows a signal to be sent by modulating the light at different rates. The signal can then be received by a detector that interprets the changes in light intensity FIGURE 1: With each light or bulb serving as an internet connection and a means to gather data, future innovations and applications may be limited only by the imagination. (the signal) as data (Figure 1). This detector is incorpo- rated in a communications device. The high frequency of light/data transmission is undetectable to the human eye. The LED lights used to transmit Li-Fi signals are modulated at such a fast rate that the eye cannot perceive the modulation or flicker. This is similar to the way eyes do not interpret the break between film frames in a motion picture. Just as people see a smooth motion on the cinema screen, they will see an uninterrupted source of steady light streaming from a Li-Fi-enabled luminaire. As a comparison, the lowest frequency at which the lights are modulated is 1 MHz, which is 10,000 times faster than the refresh rate of com- puter screens. Since the intensity of modulation cannot be seen, the data communication is the same as other radio systems. This allows users to be connected to wire- less internet where there is Li-Fi-enabled light. Because LED lamps are electronic devices, their currents and, therefore, their lights can be modulated at extremely high speeds. The modulated light is detected by a photosensor in the electronic device that receives it, which then converts the pulsing light into an electri- cal current through a transceiver. This electrical current forms the data signal.

