Issue link: https://www.e-digitaleditions.com/i/1284149
October/November/December 2020 I 23 However, what happens to a building that did not intend to have addressable lighting due to budgetary reasons? For starters, the Wi-Fi service is always there. Secondarily, depending on the number of devices that are wired into the network, an engineer or designer would have to weigh the costs of each option to determine the feasibility of adding addressable lighting with Li-Fi service and its added benefits. There are certainly other consider- ations in that decision-making process, such as future needs of the space, health implications, interference with other systems and equipment, the client's knowledge of Li-Fi, and potential future savings. A life cycle cost analysis may be required because lighting energy savings may also offset the initial capital cost with a rate depending on the size of the building. Figure 3 is a diagram of a typical Li-Fi installation. This diagram is provided for guidance only, since actual installations would have to be evaluated on a project basis by the engineer of record. CURRENT CHALLENGES TO Li-Fi TECHNOLOGY As with most emerging technologies, there are challenges to overcome, and Li-Fi is no exception: 1. Because the technology is in its early stages, Li-Fi equipment is not yet widely available. There are a few sources where some equipment, such as transceivers, lighting, LiFi compatible drivers, routers and kits, can currently be purchased (e.g., Oledcomm, pureLifi, Signify, VLNComm). 2. A Li-Fi transceiver is needed as an add-on for mobile phones, tablets, computers and other electronic devices. Large manufacturers have yet to incorporate a Li-Fi transceiver into their mobile devices. 3. Light emitting diode luminaires that work with Li-Fi technology are currently limited. Lighting FIGURE 3: An example of a Li-Fi installation.

