Issue link: https://www.e-digitaleditions.com/i/1284149
62 I ICT TODAY IEEE P802.3db 100 Gb/s, 200 Gb/s, and 400 Gb/s Short Reach Fiber Task Force A task force has been formed to develop physical layer specifications that will support a number of objectives, including 100 Gb/s over 1 pair of MMF, 200 Gb/s over 2 pairs of MMF, and 400 Gb/s over 4 pairs of MMF, with lengths up to at least 50 m. The key area of consideration will be MMF/VCSEL-based solutions. Large hyperscale and enterprise data centers are considering a move away from top of rack (ToR) switching, migrating to middle of row (MoR) or end of row (EoR) switches as server counts in racks decrease, driven by increasing power dissipation per server as server speeds move to 100 Gb (Figure 20). 25 Links over MMF will evolve to 100 Gb/s PAM4 VCSELs in the 2021 timeframe. They will initially target short-reach (30 m) server interconnects in an 800GBASE-SR8-type application (2 x 400G-BASE-SR4, since 800 Gb/s MAC rate is not FIGURE 20: Evolution from TOR switch architecture to MOR switch architecture. Today TOR Tier 0/1 Future Switch ASIC Switch ASIC 100G 25G 20- 30m 3m 100G 25G 100G 25G 100G 50G (2x25G) 50G (2x25G) Consortium/MSA 25G Server Server No Supporting SMF PMDs Server yet specified), offering eight-way breakout from one 800 Gb/s switch port (2 x 400 Gb/s) to eight 100 Gb/s server ports. There is also considerable interest on the part of some hyperscale customers for switch-to-switch links up to 50+ meters. As manufacturing experience is gained, support for longer reach 100 m switch-to-switch links will become available. Breakout Use Case - Servers The key value proposition of SWDM4 and 100 Gb BiDi is the utilization of much lower cost, often already installed, duplex fiber cabling and connectivity instead of parallel fiber cabling and connectivity. The market need for 100Gb/s lanes is expected to expand rapidly once 100 Gb/s server ports become available and are rapidly deployed in hyperscale data centers. These data centers can contain hundreds of thousands of servers, so the availability of a low power, low cost solution is crucial. When this requirement for higher speed is combined with longer switch to server links, traditional copper twinax and twisted-pair solutions are no longer viable, thereby opening the door for new low-cost optical solutions.

