Issue link: https://www.e-digitaleditions.com/i/1284149
October/November/December 2020 I 63 Data Rate Gb/s Ethernet Standard Proprietary/MSA Module IEEE Standard/MSA/ # Fiber Pairs # λ 'S Optical Modulation Reach (m) OM3 OM4 OM5 100 100GBASE-SR4 Standard 4 1 25G NRZ 70 100 Same as OM4 100 100G – SWDM4 MSA 1 4 25G NRZ 75 100 150 100 100G – BiDi Proprietary 1 2 50G PAM4 70 100 150 400 400GBASE-SR16 Standard 16 1 25G NRZ 70 100 Same as OM4 50 50GBASE-SR 1 1 50G PAM4 70 100 100 100GBASE-SR2 2 1 50G PAM4 70 100 200 200GBASE-SR4 4 1 50G PAM4 70 100 400 400GBASE-SR8 Standard 8 1 50G PAM4 70 100 Same as OM4 400 400GBASE-SR4.2 4 2 150 100 100GBASE-SR IEEE 802.3 Study Group 1 1 100G PAM4 30? 50? Same as OM4 200 200GBASE-SR2 2 400 400GBASE-SR4 4 800 800GBASE-SR8 Future Technology 8 1 100G PAM4 50? 4/4/800/1600 4/800/1600GBASE-SRm.n. 1/2/4/8 TBD 100G PAM4 100M OVER MMF ≤30-50m breakout to server will be first use of 100G/lane VCSELs Potential Next Generation MMF Links Current MMF technology allows speeds of up to 200 Gb/s in a single fiber pair by combining WDM and advanced signal modulation. As 100 Gb/s lanes become available, four wavelength WDM can provide the capability to sup- port 400 Gb/s links over a pair of fibers and up to 1.6 Tb/s over 4 pairs of fiber. Of course, significant work remains in order to support four wavelength, 100 Gb/lane/s WDM, primarily on the transceiver side. MSAs Play an Important Role In March 2017, an SWDM MSA was developed and released with specifications for 40 Gb SWDM4 and 100 Gb SWDM4. Commercial 40 Gb SWDM4 and 100 Gb SWDM4 products are currently available. These SWDM4 modules utilize four wavelengths with 30 nm spacing (850 nm, 880 nm, 910 nm and 940 nm). Essentially, 100 Gb BiDi uses two wavelengths (857 and 908 nm) to extend the value of duplex cabling and connectivity infrastructure. Commercial 100 Gb BiDi products became available at the beginning of 2018 and have since been widely adopted. The key value proposition of SWDM4 and 100 Gb BiDi is the utilization of much lower cost, often already installed, duplex fiber cabling and connectivity instead of parallel fiber cabling and connectivity. An MSA on 400 Gb BiDi was announced in July 2018 to define optical data link specifications and promote the adoption of interoperable 400 Gb/s optical transceivers based on a dual-wavelength bidirectional transmission technology over MMF. These parts are expected to be fully compliant and backward compatible with IEEE 802.3cm 400GBASE-SR4.2 standards-based products. The supported reaches for OM3, OM4 and OM5 fiber for 100 Gb-SWDM4, 100 Gb-BiDi, 400 Gb-BiDi, along with MMF PMDs from 802.3bs, 802.3cd and 802.3cm are shown in Table 2. Highlighted is the extended reach benefit and future-proofing value proposition of OM5. It also points out the potential of 100Gb/s lanes for an 800 Gb solution. CONCLUSION Ultimately, successful technology will leverage both improved MMF and VCSEL-based transceiver properties in order to minimize total link costs in the cost-sensitive short-reach enterprise/data center environment, preserving the VCSEL-MMF link advantages far into the future. The strong projected growth trends for MMF, in conjunction with standards advancements, ensure that MMF solutions are here to stay—giving ICT designers and installers continually more flexibility for their customers' cost-effective data center and enterprise high-speed applications. TABLE 2: Evolution of VCSEL-based links over MMF. Question marks=still not determined.

