Sport Rocketry

Sport Rocketry 6.2020

Issue link: https://www.e-digitaleditions.com/i/1302769

Contents of this Issue

Navigation

Page 36 of 47

SPORT ROCKETRY NOVEMBER/DECEMBER 2020 37 as I wouldn't be using that decal in my build. I also took the opportunity to make some slight adjustments to the small tex- tual markings, as some of these appeared to be inconsistent with standard fighter jet nomenclature. Once the redraw was finished the marking set was printed on Expert's Choice laser decal film, using an HP desktop color laser printer. Since decals and I sometimes have the occasional argument, I made sure to print a few extra spares. Louvers installed. www.siriusrocketry.com motors - chutes - tools - adhesives - parts - great kits from the finest manufacturers - and so much more in our secure online store! It's now time to have some serious fun with rocketry, visit us today! The Sirius Rocketry Eradicator is the newest kit in our Transition Series of kits, rockets that fly comfortably on F & G motors and are built to fly on an H when you're ready for your level one! From model to High Power, we're serious about rocketry! Transition into fun! Once the markings were dry, the air- frame was overcoated with Testor's #1960 Lusterless Flat. Infra-Red Photon Torpedoes Up next, the ordnance. Unfortunately, one of the ST-41 torpedo tubes supplied in my kit was crushed. A very close replacement is eRockets BT-4 tubing. I found it to be just a slight hair oversize in OD, but very, very close. With a bit of prep work, we have a pair of torpedoes ready for finishing. One will note the strip of masking tape on each torpedo. That tape will be pulled after final paint to reveal a bare strip that we'll use as our gluing surface. Some putty work was needed on the Kit decal sheet. JonRocket.com Model Rocket Kits, Parts, Supplies, and Accessories

Articles in this issue

Links on this page

Archives of this issue

view archives of Sport Rocketry - Sport Rocketry 6.2020