Sport Rocketry

Sport Rocketry 6.2020

Issue link: https://www.e-digitaleditions.com/i/1302769

Contents of this Issue

Navigation

Page 37 of 47

38 NOVEMBER/DECEMBER 2020 SPORT ROCKETRY various seams to fill and blend things in. Each torpedo was then re-primed and then sprayed with Testors Olive Drab #1911. Once the color coat had cured, the torpedoes were sprayed with Testors Gloss Coat to prepare them for their markings. Recalling that the Classic Kit paint scheme rendered the torpedoes in just plain Olive Drab, I thought they might pop Airframe markings and flat coat applied. FOR ALL YOUR MOTOR NEEDS www.BALSAMACHINING.com We carry the complete Estes, Quest & Aerotech motor lines. Go to our website and see how you can save 25% OFF high power propellant and 20% OFF high power hardware using our pre-order program. a bit if I could work in a couple of yellow stripes; I added some service text for effect. The yellow stripes were taken from MicroScale's #91106 HO Scale 3" striping sheet; the service text was copied from an online photo, then prepared in Microsoft Word. Once the markings were applied and had dried, each torpedo was overcoat- ed with Testors #1960 Lusterless Flat, and set aside for final assembly. On to the Air- to-Air Missiles. Air-to-Air Missiles Each missile tube was fitted with a length of masking tape to protect the glu- New markings. ing surface from paint, and then primed. Spirals were filled with Squadron White Putty, sanded, then re-primed. Once cured, the missiles were sprayed with Dupli-Col- or Perfect Match Arctic White. Each fin unit was sprayed with Dupli-Color Perfect Match Cardinal Red, and each missile nose cone sprayed with Testor's #2966 Bright Light Blue. Once the paint had cured, a couple of yellow stripes and some service text was applied for effect. Each missile was then overcoated with Testors #1960 Lusterless Flat, and set aside for final as- sembly.

Articles in this issue

Links on this page

Archives of this issue

view archives of Sport Rocketry - Sport Rocketry 6.2020