38 NOVEMBER/DECEMBER 2020 SPORT ROCKETRY
various seams to fill and blend things in.
Each torpedo was then re-primed
and then sprayed with Testors Olive Drab
#1911. Once the color coat had cured, the
torpedoes were sprayed with Testors Gloss
Coat to prepare them for their markings.
Recalling that the Classic Kit paint
scheme rendered the torpedoes in just
plain Olive Drab, I thought they might pop
Airframe markings
and flat coat applied.
FOR
ALL
YOUR
MOTOR
NEEDS
www.BALSAMACHINING.com
We
carry
the
complete
Estes,
Quest
&
Aerotech
motor
lines.
Go
to
our
website
and
see
how
you
can
save
25%
OFF
high
power
propellant
and
20%
OFF
high
power
hardware
using
our
pre-order
program.
a bit if I could work in a couple of yellow
stripes; I added some service text for effect.
The yellow stripes were taken from
MicroScale's #91106 HO Scale 3" striping
sheet; the service text was copied from an
online photo, then prepared in Microsoft
Word. Once the markings were applied
and had dried, each torpedo was overcoat-
ed with Testors #1960 Lusterless Flat, and
set aside for final assembly. On to the Air-
to-Air Missiles.
Air-to-Air Missiles
Each missile tube was fitted with a
length of masking tape to protect the glu-
New markings.
ing surface from paint, and then primed.
Spirals were filled with Squadron White
Putty, sanded, then re-primed. Once cured,
the missiles were sprayed with Dupli-Col-
or Perfect Match Arctic White. Each fin
unit was sprayed with Dupli-Color Perfect
Match Cardinal Red, and each missile nose
cone sprayed with Testor's #2966 Bright
Light Blue. Once the paint had cured, a
couple of yellow stripes and some service
text was applied for effect. Each missile
was then overcoated with Testors #1960
Lusterless Flat, and set aside for final as-
sembly.