SPORT ROCKETRY NOVEMBER/DECEMBER 2020 37
as I wouldn't be using that decal in my
build. I also took the opportunity to make
some slight adjustments to the small tex-
tual markings, as some of these appeared
to be inconsistent with standard fighter jet
nomenclature.
Once the redraw was finished the
marking set was printed on Expert's Choice
laser decal film, using an HP desktop color
laser printer. Since decals and I sometimes
have the occasional argument, I made sure
to print a few extra spares.
Louvers installed.
www.siriusrocketry.com
motors - chutes - tools -
adhesives - parts -
great kits from the
finest manufacturers -
and so much more in
our secure online store!
It's now time to have
some serious fun with
rocketry, visit us today!
The Sirius Rocketry
Eradicator is the
newest kit in our
Transition Series of
kits, rockets that fly
comfortably on F
& G motors and
are built to fly on an
H when you're ready
for your level one!
From model to High
Power, we're serious
about rocketry!
Transition
into
fun!
Once the markings were dry, the air-
frame was overcoated with Testor's #1960
Lusterless Flat.
Infra-Red Photon
Torpedoes
Up next, the ordnance. Unfortunately,
one of the ST-41 torpedo tubes supplied in
my kit was crushed.
A very close replacement is eRockets
BT-4 tubing. I found it to be just a slight
hair oversize in OD, but very, very close.
With a bit of prep work, we have a pair of
torpedoes ready for finishing.
One will note the strip of masking tape
on each torpedo. That tape will be pulled
after final paint to reveal a bare strip that
we'll use as our gluing surface.
Some putty work was needed on the
Kit decal sheet.
JonRocket.com
Model Rocket Kits, Parts, Supplies, and Accessories