Issue link: https://www.e-digitaleditions.com/i/1345417
• When ordering laser-cut parts, cost per part decreases dramatically when multiple copies of the same part are ordered. Cost per part seems to ap- proach a minimum when about three to four copies of a given part are ordered (a fortuitously common quan- tity in rocketry). Resin and Foam: • There are a number of strong casting resins and structural foam prod- ucts worth exploring for reinforcing rocket parts. Those products can add strength and impact resistance that would make an otherwise fragile part workable for rocketry purposes. Final Thoughts If you're reading this article you prob- ably already know that rocketry is reward- ing. Building a rocket from a kit that looks and flies great can be super satisfying and kits often offer excellent precision fit and finish from purpose-made, mass-produced parts. However, you can take it to another level and really make a project your own by diving into scratch building. Once a rocketeer takes the scratch building plunge there are practically limitless opportunities for creativity, not to mention prospects for incorporating free or low-cost repurposed materials in rocket builds. Coming upon some "found" materials can be equally gratifying and the adaptability made pos- sible by computer-aided design and 3D printing also lead to some truly one-of-a- kind projects. This little adventure started before the now-ubiquitous SARS-CoV-2 virus made its debut on the world stage. If dump- ster diving ever had any appeal, that lus- ter is now duller than ever. However, as I SPORT ROCKETRY MARCH/APRIL 2021 35 http://v-serv.com/usr/ • 01rocket@gte.net • PO Box 1242, Claremont, CA 91711 The Quad • 4x29mm The Quad—$109.95 • 24mm Boost Glider F-Dart—26.95 • 12x18mm Swarm C6-7—89.95 • 24 or 29mm Warp-1—69.95 INSTASHIP INSTASHIP E-mail today, get it next week/$12 flat rate shipping. 01rocket@gte.net Email your address and your list of items. We will confirm then ship. Easy. Pay later. described above, there are plenty of op- tions for repurposing materials that don't require actually pulling something from a trash bin. Furthermore, as I write this, much of the nation is stuck at home and the vast majority of schools are shuttered indefinitely with kids largely deprived of opportunities to venture out or socialize. For something to stay occupied, why not take up a new skill such as 3D computer design or 3D printing? Both are technically enriching and mentally stimulating. What is lying around the house that could be in- corporated into a great-flying rocket? Per- haps the time to take up rocketry scratch building has never been better. Figure 13.

