Sport Rocketry

Sport Rocketry 2.2021

Issue link: https://www.e-digitaleditions.com/i/1345417

Contents of this Issue

Navigation

Page 12 of 47

1/2A Altitude is one of the NRC (Na- tional Rocketry Competition) events for NARAM-62. It is one of the seemingly sim- plest events to fly. Any 13mm rocket will work. Except it has to hold an altimeter, and for it be competitive you probably need to use a piston, and the boost needs to be straight, and the recovery system has to deploy or at least it has to come down safe, and you have to find it, and you have to bring it back or at least the part with the altimeter, and the altimeter has to read out properly, and with the only good mo- tor for the event being the Estes 1/2A3-4T, the ejection delay is too short, and, and, and. Suddenly this simple event has a lot of things to be considered before just shov- ing a 1/2A3-4T in your Estes Bandito and launching it. To win this event you need to think about things like surface finish, weight, what altimeter to use, how to hold the altimeter in your rocket, etc. I work with a group of five A division- ers, and we met monthly (until the virus hit). I came up with what I thought would be a competitive design and had them build it. It was a 7" 13mm body tube with 15 mil G10 fiberglass fins (fin material from ASP Rocketry). The "cool" part was a nose cone design that holds the Adrel ALT-BMP altimeter. See Figures 1 and 2 for how that works. It uses an Apogee Rockets 13mm styrene nose cone. The shoulder part of the cone is replaced with a 1" length of Balsa Machining Service C5 coupler tubing that is glued into the nose cone. Three holes are punched in the bottom of the coupler. These align with vent holes placed in the body tube. The shock cord is attached to one of the holes. I was pretty pleased with this arrange- ment in that there was not both a nose cone joint and an altimeter bay joint. Also with the ALT-BMP, from the outside it is just a simple "three fins and a nose cone" 13mm rocket (no larger tubes). But then came test flying. On the day I tested it I had a friend- ly challenge with fellow WOOSH member Tom Disch that I could beat him in 1/2A Altitude. His model used a MicroPeak and the body tube of the altimeter section was bent to fit the MicroPeak. Surely my "su- perior" design could beat that. I was in for a disappointment. Tom's entry flew to 171 meters and mine only managed 164 me- ters on my BMS tube model. I also had a polished Blackshaft tube version. Maybe it would fly higher. We'll never know be- cause I forgot to reset my ALT-BMP before that flight. So Tom won the challenge but he was not happy with his altitude either. Looking at the National Scoreboard, there were already five higher flights, four in C and one in D division. Two were over 220 meters! During the pandemic, WOOSH has been having Wednesday night zoom meet- ings about NAR competition. After that launch, we had a lively Wednesday discus- sion (along with a great demonstration of RockSim given by Tom). It was clear that SPORT ROCKETRY MARCH/APRIL 2021 13 Flying 1/2A Altitude Thoughts, Ideas, Strategy, and a Plan! by Dan Wolf

Articles in this issue

Links on this page

Archives of this issue

view archives of Sport Rocketry - Sport Rocketry 2.2021