Issue link: https://www.e-digitaleditions.com/i/1408247
Introduction One of the coolest things to witness in model rocketry is a zero-delay booster motor shooting fire out of its forward end once the motor has burned. If you don't know what this event looks like, I've in- cluded a photograph in Figure 1. This pic- ture was taken with a high-speed camera using an Estes D12-0. This fireball, as you might imagine, is the physical mechanism that ignites the upper stage of a multistage rocket. I've put together the following valid and correct, constructive, logical proof to demonstrate why this event is cool: It's a moving fireball Fireballs are cool Therefore, this event is cool QED. Background As model rocket legend has it, G. Harry Stine was driving in his car one day, think- ing about how to harness the tremendous power of moving fireballs, when he came up with the concept of gap staging. Refer- ence one, which is included in almost all of my articles, conveys Stine's own account of this discovery. I've shown the basic idea behind gap staging with a drawing in Figure 2, which is my rendition of a figure shown in Stine's book. Vent holes are put in a rocket between the zero-delay motor and an upper-stage motor. As the zero-delay motor burns out, fire and burning propellant move inside the body tube toward the upper-stage mo- tor. The vents relieve pressure inside the tube, which keeps the rocket from separat- ing prematurely, allowing the upper-stage motor time to ignite. Ground Testing The measured data from a static thrust stand of a gap staging event is shown in Figure 3. What you're looking at is the 40 SEPTEMBER/OCTOBER 2021 SPORT ROCKETRY by Doug Hillson NAR 61624 gAp STAging gAp STAging Figure 1. D12-0 booster motor expelling hot gas and pieces of burning propellant at burnout.

