Issue link: https://www.e-digitaleditions.com/i/1544305
Inhalation April 2026 19 V = 2γ * RT 0 1-r (γ-1) ⁄γ γ-1 MW (5) In equations 4 and 5, the symbol "r" is the ratio of the pressure in the nozzle, P, to the source pressure, P 0 (r = P/P 0 ). Equation 4 will lead to an understanding of "crit- ical" and equation 5 will lead to an understanding of "sonic." e quantity ρV in equation 4 is the mass flow rate divided by the cross-sectional area of the nozzle. is flow rate reaches a maximum value when the func- tion of r inside the square root sign of equation 4 reaches its maximum value. To find the value of r at the maximum flow rate, we find the first derivative of this function of r and set it equal to zero (equation 6): d r 2 ⁄γ -r (γ+1) ⁄γ = 2 r 2 -1 - γ+1 r 1 ⁄γ = 0 dr γ γ γ (6) is equation can be solved for r (equation 7): r*= 2 γ γ+1 γ-1 (7) Here, we have used the superscript (*) to denote the value of r that satisfies equation 6. Because r* is the pressure ratio where the derivative equals zero, this value of r is called "critical" in the common jargon of calculus [reference 18, page 187]. e second deriva- tive at this value of r is negative, confirming that the mass flow rate is at a maximum at this pressure ratio, not a minimum nor an inflection point [reference 18, page 203]. Finally, because γ is equal to 1.4 for air, the value of r* is 0.528 for typical inhaler testing conditions. It is this figure that gives rise to the common advice that P d /P u should be less than 0.5 to achieve sonic condi- tions when testing a dry powder inhaler. Now, returning to the word "sonic," we place equa- tion 7 into equation 5, and find the velocity of the air flow when the mass flow rate of air is at its maximum value (equation 8): V = 2γ * RT 0 = γ RT γ+1 MW MW (8) But we recognize equation 8 as the speed of sound, noted in equation 2. (e second step in equation 8 involves the adiabatic condition Pρ -γ =constant, valid for an ideal gas). Equation 8 is the reason that the flow rate is called "sonic" when P d /P u is equal to r*. (For values of P d /P u smaller than r*, the velocity can- not increase further in a converging nozzle; see refer- ence 16, section 8.5 and reference 17, chapter 4). e word "sonic" does characterize the flow in an ideal Here, γ is the ratio of the heat capacity per unit mass at constant pressure divided by the heat capacity per unit mass at constant volume. In addition, R is the universal gas constant, MW is the molecular weight of the gas and T is the absolute gas temperature. A definition of the speed of sound is an important first step. But to understand why the inhaler testing community speaks of "sonic" flow, it is important to consider some of the scientific fundamentals. Consider the flow out of a nozzle, as depicted in Figure 4. Here the flow comes from a large, constant-pressure reservoir through a constricting passageway where the cross-sectional area of the passageway decreases constantly until the air exits through a small opening. is passageway is commonly called a "nozzle," and, because its cross-sectional area decreases constantly in the direction of flow, it is called a "converging" noz- zle. Air will flow at sonic speed out of a converging nozzle under some circumstances. To understand the conditions thereof, one must apply three principles: 1) conservation of mass, 2) conservation of energy and 3) the ideal gas law. Conservation of mass Conservation of mass states simply that the mass rate of air flow is a constant at all locations in the air flow path (equation 3): Ṁ=ρVA=constant (3) Equation 3 is valid for all points of the air flow in the nozzle, including those just before the nozzle dis- charges into the surroundings. For simplicity, we pos- tulate that the reservoir is so large that the mass flow rate of air leaving the reservoir makes no difference to the conditions in the reservoir (P 0 is constant). Conservation of energy Conservation of energy requires consideration of heat entering or leaving the system through the walls of the vessel and of heat generated by fluid viscos- ity. Stagnant air is one of the best thermal insulators so heat gain or loss through the walls of a large ves- sel is typically considered negligible. Frictional heat derived from viscous forces can also be neglected as a first approximation. ese approximations render the flow to be considered "adiabatic and reversible." Ideal gas law For an ideal gas flowing under adiabatic and revers- ible conditions, the mass flow rate at any point in the air flow path and the velocity of the air stream can be written in terms of the source conditions and the physical properties of air (γ and MW): Ṁ ⁄ A =ρV= 2γ P 0 ρ 0 (r 2 ⁄γ -r (γ+1) ⁄γ ) γ-1 (4)

