IFC 605.11.3, NEC.690.15, NEC 690.13(B)
Part No. 596-00237
IFC 605.11.3, NEC 690.15 & NEC 690.13(B)
Part No. 596-00238
FOR MARKING DC BACKUP SYSTEMS
l
Part No. 596-00240
Combiner Box, Circuits / Conduit Combiner Box /
Enclosures / EMT Enclosures
DC Disconnect / Breaker / Recombiner Box
EMT / Conduit Raceways
*(Reflective Material Required)
1
3
4
Building / Structure
Inverter Production / Net Meter
AC Disconnect / Breaker / Points of Connection
Production / Net Meter
(Bi-directional)
2
5 6
8
7
NEC 690.31(G)(3)(4)
l
Part No. 596-00206
NEC 690.5(C)
l
Part No. 596-00498
NEC 690.31(I)
l
Part No. 596-00590
NEC 690.54
l
Part No. 596-00239
NEC 690.5(C)
l
Part No. 596-00498
NEC 690.15 & NEC 690.13(B)
l
Part No. 596-00613
NEC 690.17(E)
l
Part No. 596-00497
NEC 705.12(D)(3) & NEC 690.64
l
Part No. 596-00495
NEC 690.52
l
Part No. 596-00252
NEC 690.13(B)
l
Part No. 596-00239
NEC 690.31(G)(I)
l
Part No. 596-00257
PV SYSTEM DC DISCONNECT
OPERATING CURRENT:
OPERATING VOLTAGE:
MAXIMUM SYSTEM VOLTAGE:
SHORT CIRCUIT CURRENT:
NEC 690.53
l
Part No. 596-00241
NEC 690.56(B)
l
Part No. 558-00350
NEC 110.16 Electrical equipment in other
than dwelling units shall be field marked to
warn qualified persons of a potential Arc
Flash hazard.
NEC 110.24(A) Service equipment in other
than dwelling units shall be legibly field
marked with the available fault current.
NEC 690.17(E)
l
Part No. 596-00497 NEC 690.35(F)
l
Part No. 596-00588
NEC 690.35(F)
l
Part No. 596-00588
NEC 110.27(C) & OSHA 1910.145(f)(7)
Part No. 596-00499
NEC 690.17(E)
l
Part No. 596-00496
NEC 690.53
l
Part No. 596-00253
PHOTOVOLTAIC AC DISCONNECT
MAXIMUM AC OPERATING CURRENT:
MAXIMUM AC OPERATING VOLTAGE:
WARNING
DUAL POWER SOURCE
SECOND SOURCE IS PHOTOVOLTAIC SYSTEM
PHOTOVOLTAIC AC DISCONNECT
MAXIMUM AC OPERATING CURRENT:
MAXIMUM AC OPERATING VOLTAGE:
Requirements for Electrical Installations (Field Marking)
This diagram is an illustration of one
photovoltaic labeling scenario. The
number and type of labels needed will
vary based on the project scope
and its related specifications.
Check with AHJ for
local requirements.
11
†
PER NEC 408.4(B)
Part No. 558-00309
†
PER NEC 408.4(B)
Part No. 558-00313
†
NOTE: Electrical Service equipment
must be field marked per the NEC Code
when it is present in a building or structure (other
than dwelling units) supported by more than one service
provider (i.e., public utilities such as electricity and a PV System).
This includes Arc Flash and informational labeling.
†
PER NEC 110.24(A)
l
Part No. 558-00313
MAX AVAILABLE FAULT CURRENT: 46,552 AMPS
DATE 2/15/12
†
NEC 230.2(E), NEC 230.72(A)
l
Part No. 558-00313
SECOND SERVICE DISCONNECT
ON NORTH SIDE OF BUILDING
INV1
THIS PANEL FED
FROM INV1
†
NEC Article 110.16 and NFPA 70E
Article 130.5(C)(1),(2),(3)
Part No. 558-00381
†
NEC 210.5 (C)(1)(B)
Part No. 558-00307
†
NEC Article 690.56(C)
l
Part No. 596-00474
Reflective Material Required.
A = BLACK
B = RED
C = BLUE
NEUTRAL = WHITE
NEC 110.27(C) Entrances to rooms or other
guarded locations that contain exposed live
parts shall be marked with conspicuous warning
signs forbidding unqualified persons to enter.
NEC 230.2(E) Where a building or structure
is supported by more than one service, add a
plaque to denote all other services.
NEC 210.5(C)(1)(B) Branch Circuits: The
identification methods used for conductors
originating within each branch circuit shall
be documented in a manner that is readily
available or shall be permanently posted
at each branch-circuit panelboard or
distribution equipment.
NEC 408.4(B)
All switchboards and
panelboards supplied by a feeder
in other than one- or two-family
dwellings shall be marked to
indicate the device or equipment
where the power supply(s)
originates.
www.hellermann.tyton.com 800.537.1512 32
