www.machinerylubrication.com
|
January - February 2017
|
23
HEAVY-DUTY MOTOR OILS
Chevron's new line of Delo 400 API CK-4 and FA-4 heav y-duty motor oils (HDMO) are intended to
provide optimized performance and better engine protection while extending vehicle life and mini-
mizing the cost of ownership. Featuring the next generation of the company's Isosyn technology, the
motor oils are formulated with premium base oils and high-performance additives to reduce carbon
emissions and help improve total vehicle efficiency. The oils are available in a variety of viscosities
and support both API CK-4 and FA-4 HDMO categories.
Chevron
www.ChevronLubricants.com
800-533-6571
CUTTING FLUID
The new Coolcut S-50 from Walter Surface Technologies is a soluble cutting fluid designed to improve
the life of cutting tools in heav y machining and manufacturing shops. The fluid is formulated to lessen
heat buildup and friction on work pieces, even in tougher applications and on hard-to-machine met-
als. Special extreme-pressure additives provide extra lubricity in order to cut materials such as tita-
nium, high-tensile steel and stainless steel, as well as other metals like aluminum and copper alloys.
Walter Surface Technologies
www.walter.com
800-522-0321
LITHIUM-COMPLEX GREASE
Cortec's CorrLube VpCI Lithium EP Grease is a new lithium-complex
grease developed for lubricating bearings, fans, chassis and other metal
areas. It is formulated with severely hydro-treated base stock and includes
corrosion-inhibiting properties. Along with resistance to oxidation, the
grease provides high-temperature stability and incorporates vapor-phase
corrosion inhibitors (VpCI) for areas not in direct contact with the lubri
-
cant. It is designed to lubricate for longer periods of time and increase the
effectiveness of seals to keep out contaminants.
Cortec
www.cortecvci.com
800-426-7832
GREASE INJECTORS
The new GL-1 X and GL-1 XL grease injectors from Graco are engineered to be used with automatic lubrica-
tion systems in heav y-duty applications, such as mining and construction, where higher pressure and output
are necessar y. Featuring an adjustable hex-head nut to easily regulate lubricant output, each injector is
built as a single-piece unit and manufactured with no vent holes and fully enclosed press fittings to prevent
lubricant leakage. The injectors have a minimum operating pressure of 1,850 psi (128 bar) and a maximum
operating pressure of 6,000 psi (414 bar).
Graco
www.graco.com
844-241-9504
