Issue link: http://www.e-digitaleditions.com/i/137513
Network Cabling Solutions Appendix Shielded Jack Installation Instructions continued 12. Slide lid over shielding and jack body while pushing down and inward. Take care not to tear or bend the foil. Foil removed from graphic to show detail. Correct installation will result with a "click" noting that it is shut. Confirm that jack is closed tightly by confirming cover is clicked in to latch towards cable. If re-termination is required, a small flathead screwdriver can be placed in the groove on the top of the lid (space between lid and body) to remove the lid. Once the lid is removed, the screwdriver can be used to push up against the manifold to release it from the IDC connections. The separate wires can then be released and the termination process can be redone. 222 For product information visit www.hellermann.tyton.com or call 800.537.1512