Issue link: https://www.e-digitaleditions.com/i/1302769
#1933, the same color I had used on my Space Transporter America. Testor's Cam- ouflage Gray is actually an old Pactra color that entered Testor's line up when Testor's acquired Pactra in the 1980s. Technically a Federal Standard color, FS 36622, Cam- ouflage Gray provides a nice neutral back- ground for the decals—the marking set I planned to use would be worked up from scratch and printed on clear decal stock with an HP laser printer. There being no white underlay for the decals, the model's base color needed to be something that wouldn't discolor the markings from un- derneath. To get there, we need a nice white base. Dupli-Color Perfect Match Arctic White nicely masks the automotive primer, pro- viding a perfect blank canvas for the next painting step. Once cured, Camouflage Gray is applied. Once satisfied with the depth and finish of the Camouflage Gray, an overcoat of Testor's Gloss #1961 pre- pares the surface to accept the markings. Markings Estes provided a two-color decal sheet with the kit, PN 37584. The decal sheet found in my kit was in good shape, and on sheet each marking appeared to be reason- ably thin, with a generous clear film sur- round. Color depth was reasonably good, although there were a few markings (main- ly the small textual markings) that were a bit mushed. No doubt this decal sheet could be used successfully were one in- tending to build a purely stock build. For my build, I still wished to evoke the F-61 marking scheme, but had already decided to move away from the two-col- or livery. So, I redrew the kit markings in TurboCad, adjusting the markings and col- ors in a few places to be more consistent with my build objectives. One marking I didn't bother with was the cockpit decal, 36 NOVEMBER/DECEMBER 2020 SPORT ROCKETRY Photon torpedo standoffs. Building a louver. Cutting louver strips. cosmicvest.com Space themed apparel. Now Offering shirts and masks!

