www.machinerylubrication.com | November - December 2021 | 7
ML
ML
Figure 4: Rough estimation of the relationship
between misalignment and bearing life.
Figure 5: Relationship between training investment per
employee and company gross profit per employee.
10X Better Aligned
e relationship between shaft alignment and
bearing reliability is reasonably well understood.
e graph in Figure 4 above does a good job of
representing how misalignment can nibble away
at bearing service life. Going from 5 mils/inch to
0.5 mils/inch (10 times improvement) can trans
-
late to over 10 times longer bearing service life.
Of course, like the previous examples, many other
factors play a role as well, including load, speed,
bearing type, lubricant, etc.
10X More Training
So far, we've only been talking about bearings.
e chart shown in Figure 5, published by the
American Society for Training and Development,
shows an interesting relationship between gross
profit per employee and training. According to
their numbers, an annual investment of $625
per employee yields an annual return of $47,000.
Extrapolating from this chart, a 10 times increase
in training investment (going from $90 to $900/
year) yields roughly $68,000 return per employee.
How does more training of maintenance
personnel affect the life of bearings? Here are
a few ways: better lubrication, better inspec
-
tion, better condition monitoring, better
fit and clearance, better balance and align-
ment, less mechanical looseness and better
contamination control. ML
About the Author
Jim Fitch has a wealth of "in the trenches"
experience in lubrication, oil analysis, tribology
and machinery failure investigations. Over the
past two decades, he has presented hundreds of
courses on these subjects. Jim has also published
more than 200 technical articles, papers and
publications. He serves as a U.S. delegate to the
ISO tribology and oil analysis working group.
Since 2002, he has been the director and a
board member of the International Council for
Machinery Lubrication. He is the CEO and a
co-founder of Noria Corporation. Contact Jim
at jfitch@noria.com.