Machinery Lubrication

Machinery Lubrication November-December 2021

Machinery Lubrication magazine published by Noria Corporation

Issue link: https://www.e-digitaleditions.com/i/1433576

Contents of this Issue

Navigation

Page 9 of 48

www.machinerylubrication.com | November - December 2021 | 7 ML ML Figure 4: Rough estimation of the relationship between misalignment and bearing life. Figure 5: Relationship between training investment per employee and company gross profit per employee. 10X Better Aligned e relationship between shaft alignment and bearing reliability is reasonably well understood. e graph in Figure 4 above does a good job of representing how misalignment can nibble away at bearing service life. Going from 5 mils/inch to 0.5 mils/inch (10 times improvement) can trans - late to over 10 times longer bearing service life. Of course, like the previous examples, many other factors play a role as well, including load, speed, bearing type, lubricant, etc. 10X More Training So far, we've only been talking about bearings. e chart shown in Figure 5, published by the American Society for Training and Development, shows an interesting relationship between gross profit per employee and training. According to their numbers, an annual investment of $625 per employee yields an annual return of $47,000. Extrapolating from this chart, a 10 times increase in training investment (going from $90 to $900/ year) yields roughly $68,000 return per employee. How does more training of maintenance personnel affect the life of bearings? Here are a few ways: better lubrication, better inspec - tion, better condition monitoring, better fit and clearance, better balance and align- ment, less mechanical looseness and better contamination control. ML About the Author Jim Fitch has a wealth of "in the trenches" experience in lubrication, oil analysis, tribology and machinery failure investigations. Over the past two decades, he has presented hundreds of courses on these subjects. Jim has also published more than 200 technical articles, papers and publications. He serves as a U.S. delegate to the ISO tribology and oil analysis working group. Since 2002, he has been the director and a board member of the International Council for Machinery Lubrication. He is the CEO and a co-founder of Noria Corporation. Contact Jim at jfitch@noria.com.

Articles in this issue

Links on this page

Archives of this issue

view archives of Machinery Lubrication - Machinery Lubrication November-December 2021