Issue link: https://www.e-digitaleditions.com/i/623533
Top Three Reasons Why You Should Use Dust-Tight Valves When it comes to selecting the right valve for your dry process application, there are many slide gates and diverter valves to choose from. Process valves are used to control the material flow in powder/bulk material handling systems (bins, hoppers, silos, downspouts, etc) in a variety of industries such as food, grain, milling, plastics, mining, and pharmaceutical. They can be used in gravity flow or low-pressure systems, as well as negative pressure systems, each system calling out for different equipment requirements. No matter what type of valve you are considering, certain applications may require a valve that is dust-tight. Dust control has become more critical in many powder/bulk applications for three main reasons: A dust-tight valve can help you mitigate these potential side effects simply by the way it is designed. Dust will always migrate through the path of least resistance. This can be a challenge when using soft polymers and packing as seals. Many dust-tight valves designed today feature hard polymers (e.g. nylon, PET) as a sealing surface, because they tend to offer better wear characteristics for most applications. Constant force is applied against the valve, compressing the hard polymer into a positive dust-tight seal. It is important to pick a valve specifically designed for dry/bulk processes to control safety hazards, maintenance costs, and profitability in your plant. • SAFETY & ENVIRONMENTAL REQUIREMENTS Dust control has been given a higher priority in many powder/bulk processes over the past few decades. That's because fugitive emissions from a valve into the atmosphere can both be detrimental to the environment and a potential safety hazard. Processing plants have an obligation to abide by the applicable federal, state and local environmental regulations and prevent environmental contamination and pollution. Employee and plant safety play a large role in dust control, especially when it comes to processing hazardous dust explosive substances / combustible dusts. These groups are classified according to the ignition temperature and the conductivity of the hazardous substance. Conductivity is an important consideration in Class II locations, especially with metal dusts. Some typical Class II locations are coal and carbon handling or processi g plants, flour and feed mills, grain elevators, plants that process magnesium or aluminum powders, producers of plastics, medicines and fireworks, Safety hazards & environmental requirements Maintenance costs Plant profitability 1 2 3

