Powder and Bulk Engineering

PBE0116

Issue link: https://www.e-digitaleditions.com/i/623533

Contents of this Issue

Navigation

Page 68 of 125

A rotary valve rotor contact detection system can help prevent tramp metal from contaminating bulk solids products and damaging the valve and downstream equipment, but these systems have limitations. This article describes how a rotary valve rotor contact detection system works and discusses the system's benefits and limitations. T he rotary valve (also called a rotary airlock or rotary feeder) is one of the most commonly used bulk solids feeding devices. The rotary valve is particu- larly useful for feeding free-flowing materials into a pres- sure pneumatic conveying system because the valve's design allows the material to enter the system while mini- mizing gas leakage out of the system. Unfortunately, the rotary valve is also one of the most common sources of metal contamination in bulk solids handling systems. For many applications, such as food, dairy, nutraceutical, and other products, freedom from metal contamination is absolutely critical. In recent years, producers of such products have been looking at rotary valve rotor contact detection systems as a way to protect product quality and prevent costly equipment damage. Many leading valve manufacturers now offer some type of rotor contact detection system. In fact, with all the options available, trying to select a system for your application can easily become confusing. Before discussing rotor contact detection systems, however, we need to understand some rotary valve basics. Rotary valve basics A typical rotary valve is comprised of a spinning metal rotor with multiple (often 6 or 8) blades (also called vanes) mounted to a rotor shaft installed inside a metal housing with a material inlet at the top and a material discharge at the bottom. The valve is powered by an electric motor, which is typically controlled by the plant's PLC. In operation, material flows by gravity from a vessel mounted above the valve through the material inlet and fills the space between the rotor's blades. As the rotor spins, the material is conveyed through the valve and f l o w s o u t t h r o u g h t h e m a t e r i a l d i s c h a rg e t o t h e downstream process step below. Preventing gas leakage requires that the valve be precisely constructed and installed to minimize the blade-to-housing gap while preventing contact between the blades and the housing, w h i c h c a n d a m a g e t h e v a l v e a n d c a u s e m e t a l contamination in the material stream. How rotor contact detection works A rotary valve rotor contact detection system uses a low- voltage DC electrical current to monitor whether the valve's rotor blades come into contact with the housing. This is typically made possible by using ceramic ball bear- ings or a ceramic coating on the rotor shaft. Since ceramic doesn't conduct electricity, this electrically isolates the rotor from the housing. Once the rotor is isolated from the housing, the system can measure and monitor the electri- cal resistance (measured in ohms) between the two com- ponents. With the resistance being monitored, if the rotor contacts the housing or if metal bridges the gap between the rotor and housing, a short occurs in the circuit (mean- ing the electrical resistance drops to near zero). This short Rotary valve rotor contact detection systems Scott Lodermeier     Powder Process-Solutions 67 PBE January 2016

Articles in this issue

view archives of Powder and Bulk Engineering - PBE0116