Powder and Bulk Engineering

PBE0116

Issue link: https://www.e-digitaleditions.com/i/623533

Contents of this Issue

Navigation

Page 11 of 125

Volkmann creates high quality, vacuum conveying solutions delivering your product just right, no matter where it needs to go. Dense phase vacuum conveying free of segregation, damage or abrasion. 609-265-0101 www.volkmannUSA.com One Solution At A Time Simply the best vacuum conveyor. r. Editor's note: This is one of a series of commentaries written by Powder and Bulk Engineering's Editorial Advisory Board members and other experts. The editorials express the individual writer's views of issues and trends affecting powder and bulk industries today. Powder and Bulk Engineering welcomes your response. New NFPA 652 standard means change A s of September 7, 2015, the new NFPA 652: Stan- dard on the Fundamentals of Combustible Dust be- came officially applicable to all facilities handling combustible dusts. This document encompasses significant changes in NFPA's approach to providing standards on combustible dust hazards. Previous to this document, in- dustry- or commodity-specific standards for the food and agricultural, metals, chemical, and wood processing indus- tries (Standards 61, 484, 654, and 664 respectively) were "stand-alone" documents. Due mainly to the comparative inconsistencies among these industry-specific standards, the NFPA created 652 to provide both consistency and single-source information on the minimum fundamen- tals to address combustible-dust-handling hazards across all industries. This means you now have to consider both the new 652 standard and your applicable industry-specific standard when addressing your facility's combustible dust hazards. Some of the more important changes are: • Dust hazards analysis (DHA): This was formerly called a PHA (process hazards analysis), and it has been simplified, with examples. Completion is required on a retroactive basis, but the time to complete varies. • Management of change (MOC): Since the majority of deflagration events involve improper changes in design, MOC is now required for certain changes made in any system or facility. • A facility owner or operator must develop a threshold level of permissible dust accumulations. This is to allow establishment of housekeeping intervals, methods, and frequency and to allow documentation. • Where an explosion hazard exists within any operating equipment, isolation shall be provided to prevent propagation between equipment. • Each building or building compartment where a dust deflagration hazard exists shall be protected from the consequence of deflagration by either prescriptive (explosion venting, separation, segregation, etc.) or performance-based design methods. Industry-based standards are currently in revision cycles and will be altered to incorporate changes that will, over time, conform to the new 652 fundamentals standard. Relevant copy will be either directly extracted from 652 or the applicable section will be referenced. NFPA committees also are reworking chapters and making definitions consistent in the industry-specific standards. Even when the commodity-based standards are successfully revised, however — which will take several cycles — considering the overall 652 fundamentals standard will be wise when planning for the future. Standard 652, along with all others, are available on the NFPA website. Go to www.nfpa.org. Jack Osborn Engineering manager Airdusco, Memphis, Tenn. JOsborn@airdusco.com Industry perspective 10 PBE January 2016

Articles in this issue

Links on this page

view archives of Powder and Bulk Engineering - PBE0116