Issue link: https://www.e-digitaleditions.com/i/623533
Dust explosions are a hazard in many bulk solids industries. Some safety measures outlined by recent regulations may require outside engineering or consulting help to implement, but many do not. This article explains what you can do to minimize your plant's risk for a dust explosion. A i r b o r n e c o m b u s t i b l e d u s t i n t h e r i g h t concentration and exposed to an ignition source will ignite and create a deflagration (or rapidly traveling flame front). If that deflagration occurs within a confined space, such as a manufacturing process vessel, the pressure buildup can cause the vessel to rupture or explode. In some cases, such an explosion can spread well beyond its point of origin. A primary explosion can disturb settled dust from nearby surfaces and disperse the dust into the air. This larger combustible dust cloud can then ignite and create a secondary explosion with potentially devastating consequences for plant workers and property. In response to a series of fatal dust explosions, in 2007 OSHA issued a National Emphasis Program (NEP) 1 (and reissued it in 2008) to focus on combustible dust safety at manufacturing plants. The NEP is broad and covers most industries, listing multiple NFPA standards, ASTM tests, and Factory Mutual industry guidelines as applicable references in its appendices. These references are regularly updated, so to ensure that your new or existing plant is safe and compliant with regulations, you should use the most current versions rather than the versions that were available when the NEP was issued. Your insurance carrier has an experienced loss-control staff that can provide technical assistance or advice regarding dust hazards. Contact your insurance carrier early during a capital project to discuss potential hazards and mitigation methods. This will allow you to include the carrier's safety recommendations in the project's capital cost estimate. While you may need outside engineering or consulting help to meet all current regulations, there are many things you can do yourself to minimize the possibility of a dust explosion at your plant and comply with the instructions, industry standards, tests, and guidelines identified in the NEP. Know your dust's explosion characteristics Any organic, food, pharmaceutical, agricultural, or metal dust is likely to be combustible. Don't assume, however, that dust from an inorganic material won't burn or support burning; many inorganic materials are combustible or can act as an oxidizer to support combustion. If your plant uses or processes combustible dust, it's your responsibility, per NFPA 68, 2 to know and keep on file the dust's material physical properties, including explosion characteristics. Keeping a file of material safety data sheets (MSDSs) may not be sufficient, since most MSDSs for bulk solids don't include information about combustibility or dust characterization. If you purchase the material, the material supplier should provide this information. If the supplier doesn't provide the information, you must have the material tested. For venting, extinguishing, or containing dust explosions for most materials, you need to know the following properties: • Deflagration index (K St ), which is the maximum rate of pressure rise (measured in bar meters per second) per ASTM E1226 3 testing methods. Controlling your plant's combustible dust hazards John Micheli Middough Inc. 75 PBE January 2016

