Powder and Bulk Engineering

PBE0116

Issue link: https://www.e-digitaleditions.com/i/623533

Contents of this Issue

Navigation

Page 85 of 125

1.800.527.2116 www.sssdynamics.com Call us, tell us what keeps you up at night. Dust build-up leads to tracking issues, belt failures, downtime. Your bottom line matters to us. Think about the Slipstick Conveyor. We are. Are you thinking about dust containment with your belt conveyor? 84 PBE January 2016 NFPA 68 requires that manufacturers with systems handling combustible dust and dust explosion venting systems keep and maintain documentation and records for these systems. This means that all drawings, calculations, specifications, maintenance records, and material physical properties need to be available for review by an inspector or AHJ. Perform a walk-around inspection of baghouses and filters every day, checking the systems for any abnormal visual or audible conditions or signs of leakage. Make sure that all hoses, clamps, and grounding straps are secure. Check reverse pulse-jet filter-cleaning systems for adequate compressed airflow and ensure that the cleaning cycles are sufficient to maintain a low differential pressure across the filters. Perform the following periodic preventative maintenance steps monthly, quarterly, or annually, depending on plant experience and internal maintenance procedures. • Check motors, gear reducers, and chain and belt drives for wear, tensioning, and alignment. • Lubricate all moving parts. • Check instrumentation for proper operation. • Open impulse tubes for pressure and differential- pressure gauges and check for material buildup. • Ensure that all filter elements or bag filter cages are properly seated to their tubesheets and properly grounded to prevent electrostatic buildup per the filter manufacturer's recommendation. • Check external and internal equipment surfaces for corrosion and erosion. Internal surfaces, such as baffles or near tangential inlets in contact with fast-moving material streams may be subject to wear. • Check solenoid valves for reverse pulse-jet filter- cleaning systems. Replace the valves if they're sticking in a closed or open position and affecting the cleaning cycles. • Check the condition of gaskets. • If possible, inspect the condition of the filter elements or bags. • Inspect the clean-air space above the tubesheet and the discharge ductwork for signs of any dust leakage or buildup. Ensure that explosion vents are properly installed and unobstructed. An explosion vent is a cover panel or door designed to rupture or open during an explosion to relieve pressure buildup inside a vessel or structure. If your dust collector is installed indoors, ensure that all explosion vent panels have properly installed ducts (with no bends, obstructions,

Articles in this issue

Links on this page

view archives of Powder and Bulk Engineering - PBE0116