Issue link: https://www.e-digitaleditions.com/i/623533
78 PBE January 2016 High surfaces. Transferring material from one location to another causes a corresponding displacement of air. Usually, the material moves downward by gravity, while the displaced air moves upward. The upward-moving air can entrain dust, which, unless the air is contained or removed by a dust collection system, will settle in the surrounding area. Since the air movement is vertical, the dust can be carried high and settle on high surfaces in the area. Also, air currents and drafts may cause the dust to disperse over a larger area, so the dust may settle on elevated surfaces in an extended zone around the spill or transfer point. A dust layer that's opaque (that makes seeing the underlying surface difficult), is significant and should be removed as soon as possible. Disturbing a dust layer just a few millimeters thick can easily create a dust cloud that could ignite and cause a deflagration. Conduct regularly scheduled inspections and clean off high surfaces in rooms or areas that contain bulk solids handling equipment. Be sure to observe the area from a high vantage point to determine where dust has accumulated. This may sound obvious, but I've often seen areas that looked clean when viewed from the ground but that had dust buildup on top of pipes and horizontal surfaces. If there are no high vantage points, such as walkways or platforms, use a scissors lift, portable steps, or a ladder. Typical high surfaces include: • Tops of equipment • Ledges • Building structural members • Tops of storage cabinets • Tops of pipes • Tops of HVAC or process ductwork • Conduits • Electrical panels and cabinets • Lighting fixtures • Sprinkler heads Fugitive dust settled on high surfaces and pipes can be disturbed by an initial dust explosion in a vessel and create a combustive atmosphere for subsequent, larger explosions.

