Issue link: https://www.e-digitaleditions.com/i/964311
PC Tech Update Reliable Powder Coating Systems Belco Industries Inc. has nearly 60 years of experience designing, manufacturing and installing complete powder coating systems for a wide spectrum of industries includ- ing the appliance, automotive, agriculture, office furni- ture and architectural just to name a few. Our complete in house line of equipment, which includes multi-stage washers, moisture drying ovens, infrared preheat ovens, powder cure ovens, powder booths, conveyors, powder coating rooms and air make-ups, make us the choice as your powder coating system equipment supplier. Showing the role of innovator, Belco designed and built the world's highest production powder coating system for aluminum extrusions. Belco installations are in plants all over the world, which gives our multi-nation customers the peace of mind of working with a trusted supplier domestically and overseas. Belco Industries, Inc. 9138 W. Belding Road Belding, MI 48809 (616) 794-0410 Email: belco@belcoind.com www.belcoind.com Toran 3™ Chemtec North America 1535 N. Park Drive, Suite 104 Weston, FL 33326 Tel: 954-228-1804 info@chemtecamerica.com www.chemtecamerica.com Toran 3 is a process for cleaning, degreasing and organic passivation, based on high boiling point organic fluids. Treatment time: 60-120", spray or dip Drip-off: minimum 5 minutes Drying: 8-10 minutes at 130-140°C Advantages of Toran 3 Derived from the innovative Plaforization line of products, Toran has the following advantages: 1. Salt spray results that are superior to iron phosphate, similar to a phosphate and a passivation or zinc phosphating. 2. Spray or dip application 3. Extremely low VOC emissions 4. Excellent topcoat adhesion, particularly on non-ferrous metals 5. For production higher than 25,000 sq.ft. per day, a scrubber can be used to recover and reuse the solvents from the system 6. Non-dangerous classification 7. Flash point higher than 212°F TORAN is recommended for powder or liquid coatings that require a curing process at more than 250°F and that lasts at least 15 minutes. 36 POWDER COATING, April 2018 Advertisement