Issue link: https://www.e-digitaleditions.com/i/1242780
May 2020 / 31 System monitors dust collector iSMF integrated safety monitor- ing system prevents collected dust from re-entering the workspace if the primary filters are leaking. Sys- tem can be used with the supplier's Gold Series dust collectors, which have ASHRAE-grade Riga-Flo filters or HEPA filters. System isolates the downstream equipment from the progression of a flame front during an explosion. System is installed on top of the dust collector and prevents explosive dust transmission from the collector, setting up a redundant sys- tem that not only arrests the flame front, but also monitors for differen- tial pressure changes. Camfil APC, Jonesboro, AR 800-479-6801 www.camfilapc.com Cyclone can perform dust collection, particle classification, material recovery Cyclone dust collector features no moving parts for low maintenance and can perform dust collection, par- ticle classification, material recovery, or a combination of these duties. Cyclone can be installed down- stream from other dry processing equipment and handles aggregates, cement, foods, pharmaceuticals, met- als, and other particulates. Cyclone can include a proprietary lining for long-term wear protection from abra- sive, corrosive, and high-temperature materials and gases. Van Tongeren, Lebanon, PA 717-450-3835 www.van-tongeren.com Dust collector handles high-volume industrial applications Direct-drive dust collector oper- ates in high-volume industrial applications in facilities with sev- eral dust-generating machines running simultaneously. Collector features heavy gauge steel with rectangular neutral vane inlets, high-efficiency cyclone separators, and US-made fan blower motors. Collector is available in 7.5-, 10-, 15-, and 20-horsepower units that include a magnetic starter with overload protector. Oneida Air Systems, Syracuse, NY 800-732-4065 www.oneida-air.com