Issue link: https://www.e-digitaleditions.com/i/507774
High-speed capsule filler GKF 2600 capsule filler encapsulates powders, pellets, tablets, liquids, and combinations at speeds as high as 2,600 capsules per minute. Modular unit uses proven and new technologies, including micro-dosing wheel that meters 2 to 30 milligrams. Features include automatic troubleshooting function, user- friendly controls, and easy-access filling stations. Options include KKE 2600 checkweigher and feedback loop that automatically regulate over- and underfilling, as well as x-ray unit that inspects weight and quality. Machine also accepts upgrades to meet your containment requirements. Bosch Packaging, Minneapolis, MN. Tel. 763 424 4700 www.boschpackaging.com industry innovations Moisture-barrier coating Opadry amb II immediate-release film coating protects moisture-sensitive formulations. Fully formulated PVA- based coating is first of its kind without polyethylene glycol or soy lecithin, reducing impurity and allergen concerns. Low-viscosity, high-productivity coating imparts robust, glossy finish and well-defined logos without affecting dissolu- tion. It preserves stability, mechanical integrity, and shelf-life of loose tablets, such as those packaged in bottles or removed from primary packaging. One-step dry powder mixes with water and is ready to use in 45 minutes. It comes in clear and pigmented forms, and recommended weight gain is 4 percent. Colorcon, Harleysville, PA. Tel. 215 256 7700 www.colorcon.com Pin mill CIM-18-S316 pharma-grade pin mill grinds friable powders, flakes, and granules into controlled particle sizes, either coarse or fine. Outer and inner discs swing away from unit on cantilevered arms, providing full access to both sides of each disc and mill housing for rapid cleaning and sanitizing. High-speed rotation of inner disc creates centrifugal force that accelerates material passing through central inlet of opposing stationary disc. As material travels at high speed from center to periphery of discs, it passes through five inter- meshing rows of rotating and stationary impact pins. Rotor spins at a few hundred rpm to 5,400 rpm to perform de- agglomeration, coarse grinding, and fine grinding (400 mesh). Unit is made of type 316 stainless steel and features sanitary butterfly valve on air intake, sanitary fittings at mate- rial intake and discharge, and wash-down motor. Munson Machinery, Utica, NY. Tel. 315 797 0090 www.munsonmachinery.com 42 May 2015 Tablets & Capsules