Powder and Bulk Engineering

PBE0116

Issue link: https://www.e-digitaleditions.com/i/623533

Contents of this Issue

Navigation

Page 80 of 125

Hidden locations. Over time, dust can accumulate in hidden or seemingly enclosed locations. Periodically check hidden areas such as interstitial spaces above ceilings or below floors. Electrical panels may not be properly sealed in areas near bulk solids handling equipment, and dust may enter and accumulate inside the panels over time. Have qualified personnel regularly open and inspect electrical or control panels near such equipment in accordance with approved electrical safety guidelines. Accumulated combustible dust in electrical cabinets or panels should be removed since ignition sources such as electrical sparks or hot surfaces may be present. Replace door gaskets and seal conduit connections as necessary. In severely dusty environments, you may need to pressurize the panel or replace it with an enclosure that's properly rated for the conditions. HVAC systems. Since light airborne dust will often follow the air currents in the area, always inspect HVAC return- air intakes for accumulated dust. A noticeable dust buildup on a return's louvers or grillwork may be an indication that dust is entering the HVAC return-air system. Excessive dust in the HVAC system could create nuisance fire alarms, since smoke detectors may not be able to distinguish between airborne dust and smoke particles. Also, if airborne dust is causing nuisance fire alarms in the HVAC system, dust is likely accumulating inside the ductwork as well. This can become a fire hazard over time, particularly in ductwork that contains heating elements, which could ignite the accumulated dust. Inspect return- air ducts periodically and clean them out as necessary. To prevent dust from entering return-air ducts, install inlet filters on the return-air intakes. Applications handling moisture-sensitive materials often use a desiccant wheel system to dehumidify the process airstream. Such systems have a steam- or electrically heated hot-air regeneration section. If the regeneration air intake is in an area where combustible dust is present, the system could accumulate dust on the heating surfaces and that dust could possibly ignite. Regularly check to ensure that inlet air filters are present, properly positioned, and clean. Packaging operations. If your facility has a packaging operation, you'll have dust from handling, cutting, and forming the cardboard cartons or cases. Over time, cardboard dust can accumulate in the immediate area if h o u s e k e e p i n g i s n 't t h o r o u g h . C a r d b o a r d d u s t i s combustible, light, and can easily become airborne around powered conveyors and other equipment with moving parts. Packaging equipment will often use compressed air for pistons, actuators, vacuum generators for suction cups, and blow-offs, and the air released from these could distribute cardboard dust over a wider area. Packaging equipment handling cardboard usually has electrical wiring or components that may not be rated for dusty environments and should be cleaned frequently to prevent dust accumulation. 79 PBE January 2016

Articles in this issue

Links on this page

view archives of Powder and Bulk Engineering - PBE0116