Powder and Bulk Engineering

PBE0116

Issue link: https://www.e-digitaleditions.com/i/623533

Contents of this Issue

Navigation

Page 83 of 125

THE BETTER CHOICE. 888.284.4574 www.brabenderti .com | sales@brabenderti.com You're In The Lead When Brabender Feeds! 82 PBE January 2016 Tramp metal. Bulk solids handling processes should include magnets or metal detectors to prevent metal contamination or damage to the equipment. Tramp metal, (or metal fragments) contacting fast moving metal equipment surfaces such as in a mill, grinder, mixer, fan, or blower could create sparks that could ignite airborne combustible dust. Regularly check magnets and metal detectors for collected material and regularly check metal detectors for proper operation and sensitivity. For each detector, keep an inspection log showing the inspection date and the inspector's name. Friction. Inspect rotating equipment regularly for proper bearing lubrication and heat discoloration. In some cases, bearing temperature monitoring may be necessary. If rotating or moving equipment becomes unbalanced or misaligned, parts can rub against each other causing a hot spot. V-belt slippage on sheaves can also generate high temperatures in some cases. Equipment and piping surfaces. Ensure that all exposed surfaces on hot equipment, piping, and ductwork are insulated to prevent accumulated dust from overheating and igniting. Also, don't allow dust to accumulate on motors that aren't Class II, Division 1 or 2, Group G rated, as the dust could overheat and ignite. Open flames and sparks. Keep combustible dust away from any burners and electrical equipment not rated for a combustible dust environment. Unrated electrical equipment may cause an electrical discharge. This includes open motors, exposed electrical devices, instruments, and fixtures such as lighting, paging systems, and telephones. Also, your plant should have and enforce a hot-work policy to control contractor and maintenance activities that involve welding, cutting, brazing, soldering, grinding, and any other activity that requires an open flame or may generate sparks. Maintain pneumatic conveying lines and associated equipment Pneumatic conveying and dust collection systems can have significant and complicated pipe routing throughout a plant. Manufacturers typically ignore conveying lines after installation, since the pipes are "stationary," with no moving parts, but pipe connections can fail and leak combustible dust into the workspace. Sufficient pipe movement from inadequate pipe supports or loosened clamp bolts can cause a clamp coupling to fail and release dust over time. In a positive-pressure pneumatic conveying system, the system's internal pressure may also cause leakage at couplings over time. Visually check pneumatic conveying and dust collection lines occasionally for signs of leaks and to ensure that all pipe joints are secure.

Articles in this issue

Links on this page

view archives of Powder and Bulk Engineering - PBE0116