Tablets & Capsules

TC0119

Issue link: https://www.e-digitaleditions.com/i/1067339

Contents of this Issue

Navigation

Page 31 of 67

30 January 2019 Tablets & Capsules helps prevent the fibers in the bag fabric from repeat- edly swelling and contracting as they absorb and release moisture. Keep storage temperatures well above 32°F (0°C) to minimize condensation and prevent expansion of any trapped moisture due to freezing, but temperatures shouldn't exceed 75°F. Large windows and bright sun- light may be good for employee morale, but prolonged exposure to intense UV radiation and heat can be harm- ful to filter bag fabric. Lastly, factor filter usage against expected shelf life. Some users set up a strategy that uses an expiration date before which the bags remain suitable for use in produc- tion followed by the usual wash process. If the bags reach their expiration date and haven't yet been used, they're inspected, washed, inspected again, and returned to storage until they're needed for use or reach their next expiration date, whichever occurs first. Identification, inspection, and record keeping Several sections of 21CFR Part 211 provide guidance on equipment identification, cleaning, maintenance, and record keeping. In this context, you can regard fluid-bed filter bags and bonnets in the same way as other prod- uct-dedicated change parts such as tablet press punches and dies, encapsulation tooling, and packaging line items such as blister dies and manifolds. Section 211.105 pertains to equipment identification using a "distinctive identification number or code that shall be recorded in the batch production record to show the specific equipment used in the manufacture of each batch of a drug product." For this reason, fluid-bed filter bags should be uniquely identified in a manner that dis- tinguishes each bag from any other bag in the store room. Good practice is to include the same identification scheme on storage containers and log books. Suppliers typically offer some form of embroidered cloth label that's stitched onto a portion of the bag where it is not in direct product contact, as shown in Figure 1a. On fluid-bed filters, this label is commonly storage container protects the filter bag and allows you to stack the containers without putting additional weight on the bags inside. Some companies will first line the con- tainer with a plastic bag, then lay the filter into the bag and tie it off with a closure before putting the lid on the container. The benefit of this combined method is that it allows the technician to remove the sealed plastic bag from the container, bring it to the production suite, and open it in the suite without having to deal with the extra step of bringing the container back to the storage area. The best storage containers are made of sturdy plas- tic, seal with airtight lids, and prevent transmission of UV light. The plastic can be the same as that used for totes, IBCs, drums, and other containers that regularly come into contact with drug products. The size of the storage containers will depend on the filter size and geometry, fabric stiffness, and whether they are bonnets or multiple-tube bags. Where practical, gently "drape" the filter bags into their storage containers, letting the bags naturally flow into the containers under their own weight. Some press- ing and compacting may be necessary, but avoid sharp folds and creases in the fabric, especially when storing the bags for several weeks or longer. Generally, you should store full-round bags individually to prevent com- pressing one bag under the weight of additional bags. This also helps to keep the container weight manageable for large bags and is more in line with GMPs since it maintains the unique identity of each bag and storage device throughout handling and storage. Pairs of half bags (or "sets") may be stored together if the container is large enough and the bags are not too large or heavy, but for very large half bags, you may want to store each half in a separate container. In many GMP facilities, conditions in the storage area may already be suitable for storing filter bags. Even when using airtight storage containers, it's benefi- cial to minimize the bags' exposure to moisture during handling and inspection. Keeping the relative humidity in work areas steady in the 50 to 60 percent range Figure 1 Fluid-bed filter bag labels a. Embroidered b. Ultrasonically embossed

Articles in this issue

Archives of this issue

view archives of Tablets & Capsules - TC0119