Tablets & Capsules

TC0119

Issue link: https://www.e-digitaleditions.com/i/1067339

Contents of this Issue

Navigation

Page 65 of 67

Utilizing Vacuum Conveying for Loading Pharmaceutical Blenders "Defining Indirect vs. Direct Vacuum Loading" In today's pharmaceutical process- ing environment, it is typical to see pneumatic conveying by vacuum as the popular means of transferring ingredients to blenders. This method utilizes inward suction which is created by the vacuum source. This process reduces any outward leakage of potential dust which typically occurs with pressure con- veying systems. Vacuum loading of blenders falls in two criteria: indirect and direct. In each case, the process vessel becomes the primary receiver. Indirect Vacuum Loading Indirect vacuum loading applications are designed with the vacuum receiver located directly above the blender, typically a ribbon blender or cone blender. Bulk material is conveyed to the vacuum receiver from a pick-up point, typically a bulk bag unloader, bag dump station, hopper, or drum via a flexible hose or stationary tubing. Certain applications may require the receiver to be mounted on load cells which precisely measure ingredients as they are delivered to the batch mixing process. The receiver acts as a holding device, prompted by a filling-and-dumping cycle, delivering the total amount to the blender. Typical advantages of indirect vacuum loading include batch accuracy and consistency over time, since the exact weight of the batch is measured and verified. A typical disadvantage is the need for headroom due to the added height requirement above the blender. If the blender is not vacuum-tolerant, indirect loading may be the only option. Direct Vacuum Loading Direct vacuum loading utilizes the blender as the primary receiver. This method is possible with both V-Blenders and Double-Cone Blenders, and is most efficient with vessels 25ft3 (700L) or larger. The normal blender cover is modified to add a vacuum inlet and outlet. During the direct-charge loading process, bulk materials are conveyed by vacuum directly to the blender non-stop, falling out of the airstream and directly into the blender. A filter receiver is connected to the vacuum outlet port of the blender cover, eliminating carryover dust. The filter receiver includes a periodical- ly-pulsed filter that enables residual dust to go back into the blender. This technique reduces ergonomic and industrial hygiene concerns by eliminat- ing the need to hand-scoop and eliminates worker exposure to respirable dusts. Additionally, this design requires less headroom and can be used for both loading and unloading the blender. Cold laser marks tablets, capsules, softgels Ultraviolet (UV) cold laser marker imprints high-resolution markings on as many as 250,000 tablets, capsules, or softgels per hour to deter counter- feiting and drug theft and enable track and trace. UV laser activates tita- nium dioxide pigment to mark image on product surface, even if wet or oily, and does not affect product integrity. Indelible, clear, tamper-proof text, barcodes, and graphics facilitate serialization of single doses as well as batches and do not fade or degrade. Cold laser can mark surface through clear window of sealed blister packs. Company offers DQ, IQ, and OQ validation; controls comply with 21 CFR Part 11. Tri-Star Technologies Tri-Star Technologies 2201 Rosecrans Avenue El Segundo, CA 90245 310 536 0444 alex.kerner@CarlisleIT.com www.tri-star-technologies.com Vac-U-Max For more information, visit www.vac-u-max.com, email info@vac-u-max.com, or call (800) VAC-U-MAX. 56 January 2019 sponsored content Tablets & Capsules

Articles in this issue

Links on this page

Archives of this issue

view archives of Tablets & Capsules - TC0119